







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Vacaville, CA
A fence gate in Vacaville typically costs between $450 and $1,900 installed, depending on width, material, and whether it’s a walk gate or a drive gate. We build and hang gates that close square, latch clean, and don’t sag six months after the install. Groundwork Construction Co. of Vacaville handles the full job: posts set in concrete, frames built true, hinges rated for the load, and hardware that survives a Solano County summer. If you’re planning a gate as part of a bigger fencing project, start with our Fence Installation page and we’ll fold the gate into the same build.
Most of the fence work we do in Vacaville is repair or replacement of gates that were hung on undersized posts or cheap hinges. A gate is the one part of a fence that moves every single day. That movement is where cheap builds fail first. We treat the gate as a structural component, not a decorative add-on. Call (888) 276-8078 and we’ll talk through what you need before anyone shows up.
Key Takeaways
- Walk gates run $450 – $850 installed; drive gates $900 – $1,900 depending on width and operator readiness.
- Every gate we build is covered by the 730-Day Done Right Promise.
- Calls are answered by a live person 24/7, including weekends.
- Background-checked, uniformed technicians on every job.
- Free project estimate and design consult; $1,000 off projects over $10,000.

When You Need Fence Gates
Gates fail in specific, predictable ways. Here’s what we hear most from homeowners around Vacaville:
- The gate drags on the ground. Nine times out of ten the post has shifted or the hinge has pulled loose. In Vacaville’s clay-heavy soil, a post set too shallow or without proper footing will heave after a wet winter and drop the gate within a season. We reset the post with a deeper footing rather than just shimming the hinge.
- The latch won’t catch. A gate that swings past the latch point is out of square, usually from a frame that was built light. Hardware swaps won’t fix a twist in the frame. We rebuild the gate square and true, then set hardware to match.
- You’re adding a dog run or privacy section. Many Vacaville yards back onto open space or a greenbelt, and homeowners need a secure side-yard gate for pets or a detached gate to access the back without walking through the house. We size and mount the gate to the exact opening.
- Your existing gate is sagging from a bad hinge spec. Standard residential hinges rated for a 30-pound gate get hung on a 60-pound cedar gate and fail in two years. We spec hinges for the actual gate weight and daily traffic.
- You need a double drive gate for RV or trailer access. Vacaville lots often have side-yard access for boats, RVs, or trailers. A double gate sized at 10 – 16 feet wide needs heavier posts and a drop rod or center support, and we build those from the start rather than retrofit them later.
- The gate is a security liability. A gate that doesn’t close is a gate that doesn’t lock. If your side-yard gate is your main barrier to the backyard, we treat the hardware and latch as part of the security picture, not a cosmetic add-on.
Our Fence Gates Process
The gate is the most-used part of your fence. We treat the whole job – from the parent fence down to the last hinge screw – as one unit. Here’s how it runs:
- On-site measure and gate spec. We walk the opening, measure the clear span, check post condition and soil, and confirm what the gate is for (people, pets, vehicles, security). You get a written spec and a firm number before we touch anything.
- Post and footing work. If the existing post is undersized or unstable, we pull and reset it with a proper footing sized for the gate’s weight. That means concrete depth and diameter matched to load and to Vacaville’s expansive clay. Skipping this step is the number-one cause of gate failure and we won’t do it.
- Frame build and hang. We build the gate square, brace it, and set hinges rated for the actual weight. Walk gates get two hinges minimum; heavier gates get three. For privacy gates we set vertical boards tight and consistent so the gate matches the fence line.
- Hardware and latch install. Latches, self-closing springs, drop rods for double gates, and any locks you’ve requested. We test the close a dozen times before we call it done, because a gate that latches on the first swing and the tenth swing is the actual standard.
- Finish and paint or seal. Cedar, redwood, or composite gets sealed or painted to match the fence. Metal gates get touch-up on welds. We match the finish to the parent fence so the gate doesn’t stand out as an afterthought.
- Walkthrough and sign-off. You open and close the gate, we check the swing, latch, and clearances in front of you. If anything doesn’t feel right, we fix it on the spot. The 730-Day Done Right Promise backs every gate we hang.
If the gate is part of a new fence installation, we sequence the gate build into the main run so there’s one crew, one schedule, and one point of accountability. That’s the difference between home fencing done as a single job versus a gate bolted onto someone else’s fence.

Fence Gates Pricing in Vacaville
Gate pricing depends on material, width, post condition, and hardware. Here’s what Residential homeowners in Vacaville should expect to spend for a professionally installed gate:
| Gate Type | Typical Installed Range | Notes |
|---|---|---|
| Cedar or redwood walk gate (3 – 4 ft) | $450 – $750 | Standard side-yard or front access |
| Composite or vinyl walk gate | $650 – $950 | Low maintenance, matches composite fence |
| Metal or ornamental walk gate | $700 – $1,200 | Iron, aluminum; locks and self-close available |
| Double drive gate (10 – 14 ft) | $1,200 – $1,900 | Drop rod, center support; operator-ready |
| Gate operator installation | $1,400 – $3,200 | Separate from gate build; smart openers available |
| Post reset (per post) | $250 – $500 | Includes concrete footing and disposal |
| Hardware replacement only | $150 – $400 | Hinges, latch, or drop rod swap |
What pushes a gate into the higher end of a range: an existing post that’s failed and needs full reset, a gate wider than 4 feet, ornamental metal, or a gate that needs to carry automation. What keeps it lower: matching an existing fence style, a solid post already in place, and a standard walk gate with basic hardware.
The number you see is the number you pay. No-hassle upfront pricing means the written estimate matches the invoice. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so a gate plus a fence repair can sit in one project without stretching the budget. Free project estimate and design consult on every job.
For brand-matched materials across a larger fence build, we spec from a curated catalog that includes Wellborn and Cambria for homeowners who want the gate and fence to tie into the rest of the exterior finish. Those are the same brand partners we use on remodel work across the rest of the property.
What Materials Work Best for Gates in Vacaville?
Cedar is the most common gate material in Vacaville, and it holds up well here because our summers are dry enough to keep rot at bay when the gate is sealed. Cedar also moves less than pine after a wet winter. That’s the practical reason we recommend it, not a style preference.
- Cedar: Best balance of weight, weather resistance, and cost for walk gates. Requires re-sealing every 2 – 3 years in our climate.
- Composite and vinyl (including brands like Wellborn and Cambria where the design calls for a matched exterior palette): Higher upfront cost, near-zero maintenance. Good for homeowners who don’t want to reseal a gate every few years.
- Metal and ornamental iron: Longest lifespan and best for drive gates and security gates. Requires periodic touch-up on welds but handles daily use better than wood.
- Chain link with gate frame: Practical for pet containment or side-yard access. Lower cost, less visual appeal.
Whatever the material, the gate has to be sized to the post and hinged for weight. That’s a build detail, not a material one, and it’s where cheap gates fail.
Common Gate Problems We Fix in Vacaville
Vacaville sits in a climate that swings between dry summers and wet winters, and in that cycle, gate problems show up on a schedule. Post heave in spring after heavy rain is the biggest culprit. We also see:
- Sagging from post heave. Expansive clay soil lifts posts in wet seasons, which drops the gate on the latch side. Reset the footing and the sag disappears.
- Hinge pull-out. Undersized screws or lighter hinges working loose over time. We upgrade to structural screws and heavier hinges.
- Frame twist. Gates built from thin stock or unbraced frames warp. A diagonal brace or steel strap fixes it or we rebuild.
- Rusted hardware. Galvanized or cheap-plated hardware on wood gates. We spec stainless or hot-dipped galvanized hardware for the long haul.
- Won’t latch because the fence line moved. The gate was fine, the fence line shifted. Realign or reset the adjacent post.
If your gate needs to match a fence repair in progress, the cheapest path is often to combine the work. We’ll quote the gate and the fence together and tell you honestly which repairs are necessary and which can wait.
Why Choose Groundwork Construction Co. of Vacaville for Fence Gates?
We build gates as part of a full-scope fence and home construction practice, not as a standalone add-on. That means the same craftsmanship standards that go into a fence install in Vacaville go into every gate we hang.
- 730-Day Done Right Promise. If it’s not done right, we make it right. One of the longest workmanship guarantees in the residential construction space, on every gate.
- Live person, 24/7. Calls are answered by a live person around the clock. No voicemail, no waiting until Monday.
- Background-checked, uniformed technicians on every job. Our technicians have up to 12 years of experience in fence and gate work.
- Upfront pricing, no surprises. The written estimate matches the invoice. Every time.
- Trusted material partners across every service category, so the gate hardware and material match the rest of the build.
Groundwork Construction Co. has been in business since 2014 and serves local communities across its markets. Our work is covered by the 730-Day Done Right Promise on every gate we install, and every job is backed by our free project estimate, $1,000 off projects over $10,000, and 0% financing for 18 months.
FAQs – Fence Gates
How much does a fence gate cost in Vacaville?
A standard cedar or redwood walk gate in Vacaville runs $450 – $750 installed. Double drive gates and ornamental metal gates run $900 – $1,900, and gate operator installation is priced separately. Cost depends on width, post condition, material, and hardware. Call (888) 276-8078 for an exact quote – estimates are free.
Can you build a gate to match my existing fence?
Yes. We match material, height, style, and finish to your existing fence line so the gate reads as part of the fence, not a bolt-on. We also handle the post reset and hardware upgrade when the existing post or hinges can’t support a heavier or wider gate. Call us with the fence style and we’ll tell you what’s possible.
Is it cheaper to repair a gate or replace it?
Repair is cheaper when the gate itself is sound and only the hinge, latch, or post needs work. Replacement is usually cheaper when the frame is twisted, the post has failed, or the gate is undersized for its use, because you fix the underlying issue once instead of chasing it. Call (888) 276-8078 for a free assessment and we’ll tell you honestly which path makes sense.
Can you come today?
Same-day and next-day availability depends on schedule, but our call line is answered by a live person 24/7 and we’ll get you on the calendar as soon as we can. For standard gates we typically schedule within a few days. Call (888) 276-8078 and we’ll give you a real timeline, not a callback promise.
Related Services in Vacaville
- Fence Installation – the full fence build, including gate integration
- Fence Repair – gate and post repairs without a full rebuild
- Fence Installation in Fairfield – neighboring Solano County service
- Fence Installation in Dixon – neighboring Solano County service
- Fence Installation in Davis – neighboring Yolo County service
- Driveway & Pavers in Vacaville – gate approach and driveway tie-in
- Kitchen Remodeling in Vacaville – full-scope remodel work
- Roofing in Vacaville – GAF and CertainTeed roof systems
- Windows & Doors in Vacaville – Andersen and Pella exterior doors
- Home Additions & ADU in Vacaville – full-scope structural work
- Bathroom Remodeling in Vacaville – Kohler fixtures and finishes
- Groundwork Construction Co. – all service lines and credentials
Schedule Your Free Fence Gate Estimate
If your gate is dragging, won’t latch, or needs to be built from scratch, call (888) 276-8078 for a free project estimate and design consult. A live person answers 24/7, every day of the week. We’ll measure the opening, spec the gate, and give you a firm number in writing – usually within a day or two of the call. From foundation to finish line, Groundwork Construction Co. of Vacaville builds gates that work on the first swing and the thousandth. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Vacaville, serving Vacaville.


