







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Dixon, CA: What It Costs and How Long It Takes
A chain link fence in Dixon, CA usually runs $3,500 to $9,000 for a typical residential run, with most standard lots landing near the middle of that range and acreage or heavy-gauge commercial-style builds pushing toward the top. A straightforward installation takes one to two days once materials are on site; permitting and layout add roughly one to three weeks to the front end. Call (888) 276-8078 and we’ll set up a free on-site estimate so you get a real number for your parcel, not a phone guess.
How We Build a Chain Link Fence in Dixon, Stage by Stage
Chain link is a simple product built right or built badly, and the difference lives in the prep nobody sees once the mesh is up. Here’s the actual sequence on a Dixon job.
- Stage 1: Walk the line and mark it (30 – 60 minutes). We meet you on site, confirm where the fence runs, and check property lines against your plat. On rural parcels you decide the setback from the fence line to any well, septic component, or outbuilding before we stake anything.
- Stage 2: Utility locate and staking (2 – 5 business days). Underground utilities get marked before a single post goes in. This is the stage that most often stretches the calendar, because 811 locates take a few days to clear. You approve the final post layout here, including gate positions and any corner bracing.
- Stage 3: Dig, set, and cure (day one, plus overnight). Terminal posts, corner posts, and gate posts get set in concrete and left to cure. Line posts follow. We set the posts deeper and with larger concrete footings on gates and corners, because those carry all the tension. Nothing gets hung the same day the concrete’s poured.
- Stage 4: Rails, tension, and mesh (day two). Top rail goes on, then the mesh is stretched and tensioned against the terminal posts. Tension bars, tension bands, and the fabric ties all get set. This is where a cheap install shows: sagging fabric or wavy top rail means somebody rushed the stretch.
- Stage 5: Gates, cleanup, walkthrough (a couple of hours). We hang the gate, set the latch and hinges, adjust the swing, and haul off all spoil and packaging. You walk the line with us and sign off. If it’s part of a full Fence Installation in Dixon project that also includes wood or vinyl runs, we sequence those stages so they don’t wreck each other’s work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link isn’t one product. Here’s what actually changes on a Dixon job and the honest trade-offs.
- Gauge of wire. 11.5-gauge is the residential standard and holds up fine for pets and property lines. 9-gauge is heavier, deflects deer and dogs better, and costs noticeably more per foot – the right call on acreage where the fence is doing real work. 6-gauge is commercial-grade and usually overkill unless you’re fencing a shop yard.
- Coating. Galvanized steel is the budget option and looks it after a few years in the sun. Vinyl-coated (black or green) costs roughly 15 – 25% more but hides rust, blends into a rural treeline, and lasts longer against Dixon’s hot, dry summers. On acreage where the fence is visible from the house, most folks go coated.
- Height. 4-foot reads as a boundary marker; 5-foot is the residential sweet spot for pets; 6-foot is where you start keeping deer honest. Height drives post spacing and footing size, so it’s a decision worth making before day one.
- Post and fitting grade. Schedule 20 line posts with heavier Schedule 40 terminal posts is the durable mix. Going all Schedule 40 adds cost but stiffens long runs on open parcels where wind load matters. Galvanized fittings (tension bands, brace bands, rail ends) should match the wire coating.
- Gates and frames. A walk gate versus a drive gate changes the frame, the hinges, and the footing entirely. Decide now if you’ll ever pull a trailer or equipment through – retrofitting a wide gate later means resetting a post.
What a Chain Link Fence Costs in Dixon, CA

Our lead range for chain link fencing in Dixon is $3,500 to $9,000. Here’s roughly how that breaks down.
| 4-foot galvanized, standard residential lot | $3,500 – $5,500 |
| 5-foot vinyl-coated, residential lot | $4,500 – $6,500 |
| 6-foot heavy-gauge, acreage or shop yard | $7,000 – $9,000 |
| Gate and frame (each, installed) | $400 – $1,200 |
| Corner or terminal post reinforcement | Priced into the run |
Five things push a job toward the low or high end. Length of run is the biggest lever. Wire gauge and coating add real money. Terrain matters on Dixon parcels – a run across a slope needs stepped posts and more concrete than a flat lot. Gate count and width add fittings and footing work. And if you’re tearing out an existing fence, demo and disposal land in the number too. A written estimate from us lists the footage, gauge, coating, gate configuration, and footing spec line by line, so you can see exactly where your money goes. Permits, if your project needs one, get pulled and inspected as part of the scope – not handed back to you as homework. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Dixon Homes Specifically Do to a Chain Link Fence Job
Dixon isn’t a typical suburb, and fencing here shows it. The city sits in the middle of Solano County’s prime farmland, so a lot of the work we do is on unincorporated or edge-of-town rural parcels – barns, shops, well and pump houses, and acreage lots where the fence has to run long distances across uneven ground. Those parcels often hinge on county versus city jurisdiction, and setback and parcel-size rules play a bigger role than they would on a tract lot. Near downtown, the older single-story homes along the core blocks usually have established fence lines with mature trees whose roots run right through the new post locations. Out on the newer subdivisions toward the edges, you get two-story stucco tract homes with clean, flat property lines and HOA rules on fence height and color – coated black or green usually satisfies those. Climate matters here too: hot, dry Central Valley summers bake galvanized steel and speed rust where the coating’s thin, and tule-fog winters keep things damp enough that moss and ground contact at the post bases becomes the failure point over time. We see more sagging tension and leaning terminal posts on Dixon acreage than we do on flat suburban lots, because the wind load across open ground is real. If you’re on acreage and working out the wider site, homeowners often pair this with ADU Site Prep & Utilities in Dixon when a separate structure is going in. We cover all of Dixon and the surrounding parcels.
Serving Dixon, CA – Our Local Coverage Area
We serve Dixon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Dixon

Most residential chain link installs take one to two working days on site once materials arrive. The calendar stretch comes before that: utility locates and staking typically add two to five business days, and permitting on rural parcels can add one to three weeks depending on jurisdiction. Call (888) 276-8078 for a timeline specific to your parcel.
It depends on your parcel and jurisdiction. Many standard residential fence installations don’t require a permit, but rural and unincorporated parcels – where county versus city rules and setback requirements come into play – often do. We check the requirement for your specific property during the estimate and pull the permit if one’s needed. Call (888) 276-8078 and we’ll sort out what applies to you.
Yes, in most cases. We stake the line and work around established landscaping, trees, and outbuildings, stepping posts over roots and slopes rather than running a straight trench through everything. If a run has to cross a buried line or a well component, we plan the post placement around it. Call (888) 276-8078 to walk your layout.
Chain link fencing in Dixon runs $3,500 to $9,000 for a typical residential run. Height, wire gauge, coating, run length, terrain, gate count, and demo of an old fence all move the number. Call (888) 276-8078 for an exact quote – estimates are free and written line by line.
Every chain link fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (888) 276-8078 with any warranty question before you sign anything.
Get a Free On-Site Estimate for Your Chain Link Fence in Dixon
Call (888) 276-8078 to schedule your free estimate for a chain link fence in Dixon. We’ll walk the line with you, check utility locates and permit requirements, and hand you a written, line-item estimate before any work starts. Calls are answered by a live person, 24/7, so you’re never stuck in a voicemail. Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked. For the broader scope, see our Fence Installation service, and if a gate or outbuilding door comes up, homeowners often pair this with Door Installation in Dixon.
Written by the team at Groundwork Construction Co.












