







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Clayton, CA: What It Takes and What It Costs
Door installation in Clayton, CA typically runs $450 to $1,850 per door for interior and standard exterior openings, and $2,400 to $6,500 for a custom wood or carriage-house entry with sidelights and premium hardware. A single pre-hung door swaps out in a day; a custom entry with finish work takes three to five. Call (888) 276-8078 for a free on-site estimate before you commit to anything.
How Our Door Installation Process Actually Runs, Day by Day

Every door is different, but the sequence doesn’t change much. Here’s what a real Clayton door installation looks like from first visit to final walkthrough.
Stage 1 – Measure and scope (day 0, about 60 minutes)
We measure the rough opening, check the wall for plumb and level, and look at what’s behind the trim. On Clayton’s older ranch homes, that measurement often turns up framing that’s out of square by half an inch or more, which changes the door size you can use. You decide here whether you’re replacing like-for-like or changing the opening.
Stage 2 – Order and confirm (week 1 to 6, depending on door)
Stock doors arrive in a week or two. A custom carriage-house door or a Marvin or Andersen entry takes four to six weeks. You sign off on the final spec sheet here: swing direction, hardware finish, threshold style, glass package. This is the stage where changes are cheap and every stage after is not.
Stage 3 – Demo and prep (day 1 of install, 3 to 5 hours)
We pull the old door and frame, inspect the header and framing for rot or termite damage, and rebuild the rough opening if it’s needed. Clayton’s dry summers mean exterior wood is often sound; the framing behind a poorly flashed door is where we find the surprises. Any rot gets flagged and priced before we keep going.
Stage 4 – Set, shim and flash (day 1 to day 2, 4 to 6 hours)
The new door goes in, gets shimmed to plumb, and the exterior gets flashed and sealed. This is the part that decides whether the door stays quiet and dry for the next twenty years. You don’t decide anything here; you just get a door that closes the same way on the hundredth day as it did on the first.
Stage 5 – Trim, hardware and final walk (day 2 to day 5, varies)
Interior casing, paint-ready trim, locksets, and any smart-home integration get finished here. We walk the job with you, check the swing, the seal, and the finish, and hand over the warranty. That’s where the 730-Day Done Right Promise comes into play.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between in Clayton
Most of the decisions that separate a $500 door from a $6,500 door happen before we ever show up. Here’s what actually matters.
- Entry door material – Fiberglass resists sun and moisture and costs $600 to $2,200 installed; wood (mahogany, oak, alder) gives you a carriage-house look and takes a custom stain but needs refinishing every five to seven years in Clayton’s summer sun; steel is the budget choice at $400 to $1,200 but dents and shows every flaw.
- Interior door style – Hollow-core slab doors run $250 to $450 installed; solid-core and shaker-style doors run $450 to $900 and deaden sound noticeably, which matters in a Clayton ranch home with a long hallway.
- Glass package – Clear glass costs less and lets in heat; Low-E or impact-rated glass adds $200 to $800 per door and is worth it on any west-facing entry.
- Hardware finish – Satin nickel and matte black run $80 to $350 per set; oil-rubbed bronze and unlacquered brass run higher but patina with age instead of flaking.
- Smart locks and openers – Keypad and app-controlled deadbolts run $150 to $500 installed. We integrate them cleanly so the door still swings true and the seal isn’t compromised by a badly mounted strike plate.
If you’re replacing the doors as part of a full exterior refresh, it’s worth pairing with the wider Windows & Doors in Clayton scope so trim profiles and finishes match across the whole facade.
What Door Installation Costs in Clayton, CA

Plan on $450 to $1,850 for a standard interior or exterior door installed, and $2,400 to $6,500 for a custom carriage-house or entry with sidelights, glass, and premium hardware. Those ranges hold true across 94517 and the surrounding hills.
Here’s what actually moves the number:
- Door size and type. A 32-inch interior slab is the low end; a 42-inch double entry with transom is the high end.
- Existing opening condition. If the framing is out of square or water-damaged, expect $200 to $600 in added carpentry. This is more common on Clayton’s 1960s-1980s homes than on newer builds.
- Material grade. Steel to solid wood is a $1,000 swing on a single entry alone.
- Relocation or structural change. Widening an opening or moving a door in a bearing wall needs engineering and a permit, which adds $800 to $2,500.
- Hardware and finishing. A basic lockset to a full smart-lock and premium hinge package is another $200 to $700.
Your written estimate lists door, frame, hardware, trim, labor, disposal, and permit fees separately. What’s not always included: repainting interior walls after demolition, refinishing adjacent flooring, or replacing trim that wasn’t part of the door scope. We call those out up front so there’s no change-order surprise later.
See the difference
Before
After
Before
After
Before
AfterWhat Clayton’s Hills and Housing Stock Do to This Job
Clayton is a small, semi-rural enclave tucked against Mount Diablo, and that shapes door installation here in ways that don’t show up in Concord or Pleasant Hill. The housing mix splits cleanly: mid-century ranch homes near the flat downtown core, and custom, often owner-built houses on large sloped lots in the surrounding hills dating from the 1960s to 1980s. On the hillside streets off Mount Diablo Scenic Boulevard, we regularly see door openings that were never squared up properly, thresholds that sit a full inch out of level, and framing that’s been flexing for decades. That’s a 30-minute measuring job on a flat-lot ranch and a half-day job on a steep custom build. Add in Clayton’s wildfire review requirements for exterior openings in hillside zones, and any door change on an exterior wall can pull in a permit and a fire-rated assembly review that a suburban swap wouldn’t. Hot, dry summers also mean we schedule exterior doors and finish work in the morning before the wood heats up and starts moving on us.
We cover all of Clayton, from the flat downtown streets to the steepest hillside parcels.
Serving Clayton, CA – Our Local Coverage Area
We serve Clayton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Clayton

A standard interior or exterior door installs in one day, four to six hours on site. A custom entry with sidelights, trim work, and hardware takes two to five days depending on finish work. Door lead time (four to six weeks for custom styles) is usually the longer wait. Call (888) 276-8078 for a firm timeline once we’ve measured.
Like-for-like replacement in the same opening usually doesn’t require a permit. A new opening, widened opening, or exterior door in a hillside wildfire zone can require one. We confirm the permit requirement before work starts so nothing stalls the inspection. Call (888) 276-8078 to check your specific door.
In most cases, yes. If the new door fits the existing opening, there’s no structural or utility work involved. Widening an opening to carry a larger door is when plumbing, electrical, or framing get moved, and that’s a different, larger scope. We tell you which category you’re in at the estimate.
Standard doors run $450 to $1,850 installed; custom carriage-house or entry doors with hardware run $2,400 to $6,500. The biggest cost drivers are door size, existing opening condition, and material grade. Call (888) 276-8078 for an exact written quote.
Every door we install is covered by our 730-Day Done Right Promise. If the swing, seal, or finish isn’t right within that period, we return and make it right. The door itself also carries the manufacturer’s own warranty, which we hand over at the walkthrough. Call (888) 276-8078 to schedule your free on-site estimate.
Get Your Free Door Installation Estimate in Clayton
We’ll come out, measure the opening, walk you through door options and hardware choices, and hand you a written line-item quote with upfront pricing, no surprises. Estimates are free. Call (888) 276-8078 and a live person will answer, day or night. If your project touches the kitchen or an ADU build, homeowners often pair door work with Cabinets & Countertops in Clayton or a Garage Conversion ADU in Clayton, so we can scope both on the same visit.
Written by the team at Groundwork Construction Co.












