







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Clayton, CA: What the Job Actually Involves
Cabinets & countertops in Clayton, CA typically run $14,000 – $45,000 for a full kitchen’s worth of new cabinetry and stone, with most hillside homes landing in the $22,000 – $34,000 band once layout corrections and delivery logistics are factored in. A straight cabinet-and-counter swap takes 3 – 5 weeks from template to final caulk; anything that moves a wall, a gas line, or a window opening stretches to 8 – 10 weeks. Call (888) 276-8078 for a free on-site estimate and a written line-item quote.
How We Run a Cabinet and Countertop Job, Stage by Stage

Cabinet and countertop work has a fixed order, and getting the order wrong is how kitchens end up with a counter that doesn’t fit the wall it was templated against. Here’s the sequence we follow on Clayton jobs.
Stage 1: Field measure and layout confirmation (day 1, about 3 hours)
We measure every wall, check for out-of-plumb corners, and photograph the plumbing and electrical rough-ins so the cabinet order accounts for where the sink actually sits, not where the old cabinet had it. You decide the cabinet door style, finish, and box construction at this visit. On sloped-lot homes in the hills, we also check floor level across the run, because a 1-inch drop over 10 feet will show up as a visible gap under the counter if the cabinet order doesn’t compensate for it.
Stage 2: Demo and prep (days 3 – 4)
Old cabinets, counter, and backsplash come out. We cap or isolate plumbing, label circuits, and repair drywall and subfloor where the old install left damage. If the wall behind the cabinets is out of square by more than half an inch, we shim and scribe rather than tear into framing, unless the layout is changing. This is also when any electrical work gets done: new dedicated circuits for a microwave drawer, an under-cabinet lighting run, or a relocated outlet for a counter-depth fridge.
Stage 3: Cabinet set and blocking (days 5 – 7)
Base cabinets go in first, leveled and fastened to studs with blocking where the counter will overhang. Uppers follow, hung to the layout line so the reveal against the ceiling and the window trim stays even. You’ll walk the room with us at the end of this stage and confirm door swing, drawer clearance, and that the dishwasher opening actually fits your appliance. Cabinet installation on its own typically prices at $4,000 – $13,000, and it’s the stage where a wrong appliance measurement costs the most time to fix.
Stage 4: Template and fabrication (days 8 – 15, off-site mostly)
Once the base cabinets are set and level, the counter fabricator templates the exact shape, including any sink cutout and edge profile. Stone slabs are cut and finished off-site. This is the waiting period homeowners underestimate: quartz and granite need 5 – 10 business days between template and install, and a slab that arrives with a vein running the wrong way against your layout means a re-order. We confirm slab selection with you before the template so the material is on hand.
Stage 5: Counter install and finish (days 16 – 18)
Counter goes down, seams are matched and polished, the sink and faucet are set, and the backsplash goes up if it’s part of the scope. We caulk, clean, and walk the job with you. Cabinet doors and drawers get final adjustment so nothing rubs. From first measure to final walkthrough, plan on 3 – 5 weeks; add 4 – 5 weeks if the layout is changing and permits are involved. Homeowners planning a wider scope often fold this into Kitchen Remodeling in Clayton so the plumbing and electrical get handled in one pass.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options Clayton Homeowners Actually Choose Between
Most of the decisions on this job come down to four trade-offs, and each one has a real cost and a real lifespan.
- Stock vs. semi-custom vs. custom cabinets. Stock boxes in fixed sizes are the cheapest and fastest but leave filler strips at the walls. Semi-custom (Wellborn is a common pick here) lets you size the boxes to the room and is where most Clayton kitchens land. Full custom is worth it when the room is irregular, which is common in the older owner-built hill homes.
- Quartz vs. granite vs. quartzite. Quartz (Cambria, Silestone, Caesarstone) is non-porous, needs no sealing, and holds a consistent pattern, which suits a clean modern look. Granite is natural, heat-tolerant, and needs resealing every year or two. Quartzite sits between them and costs the most. All three run $2,000 – $6,500 installed for a typical kitchen.
- Slab thickness and edge profile. A 2cm slab on a built-up edge keeps the price down; a 3cm slab with a mitered edge looks heavier and costs more. Edge profiles range from a simple eased edge to a full bullnose, and the fancier profiles add both cost and lead time.
- Drawer and door hardware, plus interior fit-out. Soft-close hinges, full-extension slides, pull-out trash, and a lazy Susan all add up. Decide these at order time, not after, because retrofitting interior accessories into installed cabinets is a hassle.
What Cabinets & Countertops Costs in Clayton, CA

The full range for this job in Clayton is $14,000 – $45,000, and the number that lands on your quote depends on five things, not on a flat rate.
- Cabinet scope: cabinet installation alone runs $4,000 – $13,000. More boxes, taller uppers, and custom sizing push toward the top.
- Counter material: countertop installation runs $2,000 – $6,500 depending on material and square footage. A large island or a wall of counters adds slab area and cost.
- Layout changes: moving the sink, the range, or a wall means plumbing, gas, and electrical work plus permits. That’s the single biggest driver from the low end to the high end.
- Island and extras: a new island runs $3,000 – $10,000; a backsplash adds $800 – $2,500.
- Existing condition: out-of-square walls, bad subfloor, or old galvanized plumbing found at demo all get priced into the high end.
A written estimate from us spells out cabinet line items, slab selection, edge profile, sink and faucet, demo and haul-away, and permit fees where they apply. It typically doesn’t cover appliance purchase, structural framing repair if demo uncovers rot, or a slab upgrade you choose after the quote. The number you see on the quote is the number you pay, unless you approve a change.
See the difference
Before
After
Before
After
Before
AfterWhat Clayton Homes Specifically Do to This Job
Clayton’s housing stock makes this a different job than a cookie-cutter swap in a flat subdivision. The mid-century ranch homes near the flat downtown core usually have square rooms and standard 24-inch base cabinets, so a direct replacement is straightforward. The custom, often owner-built houses on the large sloped lots in the surrounding hills are another story: rooms are irregular, walls are out of plumb, and the original cabinetry was built in place rather than ordered to a standard, so a new cabinet run has to be scribed and shimmed to fit. On the hillside streets off Mount Diablo Scenic Boulevard, driveways often exceed a 15% slope and lack a turnaround, so a cabinet delivery or slab truck needs special staging or a conveyor pump. We plan delivery logistics into the schedule on those streets, because a truck that can’t make the turn adds a day. The Diablo Range rain shadow also matters: extreme fire-danger days trigger red-flag restrictions that can pause any on-site cutting or welding, and winter rains saturate the clay soils and slow exterior staging. That’s why we build float into the calendar on hillside addresses rather than promising a fixed install date that the weather can blow up.
Serving Clayton, CA – Our Local Coverage Area
We serve Clayton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Clayton

Plan on 3 – 5 weeks from first measure to final walkthrough for a straight replacement, and 8 – 10 weeks if the layout changes and permits are involved. The off-site stone fabrication window of 5 – 10 business days is the part homeowners most often underestimate, so we confirm slab selection before template to keep it tight. Call (888) 276-8078 for a timeline specific to your kitchen.
No permit is needed for a like-for-like cabinet and counter replacement, but you do need one if the work moves plumbing, gas, or electrical, or changes a wall. Hillside and wildfire-review properties can also trigger additional plan review, so we confirm what your address requires before we start. We pull the permits that are required and see the inspections through. Call (888) 276-8078 and we’ll tell you what your job needs.
Yes, and that’s the most common approach. Keeping the sink, range, and walls where they are means a direct replacement with no permit and a 3 – 5 week timeline, and it lands closer to the $14,000 end of the range. Moving plumbing or a wall pushes you toward the $45,000 end. Call (888) 276-8078 to talk through which path fits your kitchen.
Our workmanship is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers installation, fit, and finish on the cabinets and counter, not the manufacturer’s material defect, which is covered separately by the brand. Call (888) 276-8078 with questions about coverage on your job.
Yes. Cabinet and counter work is often the finish stage of a larger scope, and homeowners frequently pair it with Garage Conversion ADU in Clayton or a New Detached ADU in Clayton when the ADU needs its own kitchenette. If you’re weighing the wider project, start with our Kitchen Remodeling service and see how the pieces fit together. We cover Clayton and the surrounding Contra Costa communities. Call (888) 276-8078 for a free estimate.
Get a Free Cabinet and Countertop Estimate in Clayton
Call (888) 276-8078 to schedule a free on-site estimate for cabinets & countertops in Clayton. On the call we’ll ask about your kitchen size, whether the layout is changing, and your cabinet and counter material preferences, then set a time for us to measure and put a written line-item quote in your hands. Estimates are free, calls are answered by a live person around the clock, and every job is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












