







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Let me sort out one thing before writing.
There’s a conflict in the brief I need to resolve. The editorial spine given for this page describes rural/acreage garage-door work – workshops, oversized doors, heavy-duty springs, long service drives. But the page’s actual target is Cabinets & Countertops in Napa, and the whole brief insists on topical purity and staying narrow. Writing about garage doors on a cabinets page would break SiteFocusScore and confuse the reader, so I’m writing the spine for the actual topic: Napa’s specific property types and material demands (wine-country estates, hillside WUI rebuilds, historic downtown stock), and the “one trip, done right” angle recast as the one-visit measurement/template discipline that keeps cabinet and countertop install honest.
Similarly, the brand guideline given is clearly the Groundwork brand’s standing boilerplate (“42 years,” “since 2014,” the longest-guarantee claim). The legal rules in my operating instructions override any conflicting business fact: I can’t state company age or founding year, and “42 years” contradicts “since 2014.” I’ve used only compliant trust claims (730-Day Done Right Promise, live-person 24/7 calls, upfront pricing, 0% for 18 months, $1,000 off over $10,000, background-checked uniformed technicians, up to 12 years technician experience). I also left out the four fence brands (Barrette, Master Halco, Ameristar, Jerith) because they have no place on a cabinets page, and used KraftMaid and Cambria plus Kohler, which do.
Here’s the page.
Cabinets & Countertops in Napa: What the Job Actually Involves
Replacing cabinets and countertops in Napa usually takes six to ten working days of labor spread across four to six weeks of calendar time, most of that waiting on cabinet fabrication and stone templating. The installed cost runs $14,000 – $45,000 for a typical full kitchen, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500 inside that number. Call (888) 276-8078 and we’ll walk your kitchen and give you a written, line-item estimate.
The process, stage by stage

Napa Valley contractors can’t afford to lose a run of good weather or miss a crush-season deadline, and homeowners here tend to want a job that finishes clean the first time. That shapes the order we do things in. Here’s the sequence, and what you’ll be deciding at each point.
1. Measure and template (day 1)
We measure every wall, check for out-of-square corners, out-of-plumb walls, and note where the range, sink, and outlets land. If you’re keeping appliances, we confirm the cutout dimensions on site. This is where you lock the cabinet layout and door style, because nothing gets fabricated until this is signed off. Expect about two hours on site.
2. Order and fabrication (weeks 1 – 4)
Stock cabinetry ships in one to two weeks. Semi-custom, which is what most Napa kitchens here land on, runs three to five weeks. Full custom can stretch to eight. Stone slabs get selected at the yard after cabinets are ordered so we’re not holding template risk. You decide door style, finish, drawer hardware, and slab selection during this stretch, and this is the biggest pinch point for schedule slippage.
3. Demo and prep (hours 1 – 6 of install)
Old cabinets and counters come out, usually in a single day. We inspect what’s behind them: soft drywall, old tile adhesive, or a surprise water stain under the sink. If the countertop is stone, it comes out in pieces and gets hauled off. Plumbing and electrical get roughed to the new layout if anything moves.
4. Cabinet and countertop install (days 2 – 5)
Cabinets go in first, leveled and shimmed, then scribed to the walls. The countertop fabricator templates once cabinets are set, then installs the slab two to seven days later. You’ll pick the sink and faucet before template day, not after. This is where a one-trip mindset matters: a missed measurement means a second visit and a six-week delay at the worst moment.
5. Final pass and walkthrough (day of finish)
Counters get sealed, the sink and faucet get set, toe kicks and trim go on, and we clean the space. Which brings us to the question that actually decides the price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
The honest truth is that cabinet and countertop choices drive the budget far more than labor does. Here’s where the trade-offs really sit.
- Stock vs. semi-custom cabinetry. Stock is the cheapest per box and arrives fast, but standard widths mean filler strips at the walls. Semi-custom, including KraftMaid lines, lets you dial in widths, drawers, and finish, and usually adds 15 – 25% over stock pricing.
- Quartz vs. granite vs. quartzite. Quartz is non-porous, consistent in color from slab to slab, and needs no sealing. Granite is more varied and often less expensive per square foot but wants periodic sealing. Quartzite looks like marble with granite durability, but it’s the priciest of the three.
- Plywood vs. particleboard boxes. Plywood holds up better under Napa’s dry summer months and resists swelling if a sink ever leaks. Particleboard is cheaper but less forgiving. This is a choice worth paying for.
- Drawer hardware and hinges. Soft-close slides and full-extension drawers add cost but change daily feel more than any finish choice. Under-mount vs. top-mount sinks have the same effect.
- Slab thickness and edge profile. A 3cm slab with a simple eased edge keeps cost down; a thick mitered edge on a large island adds material and fab time.
What Cabinets & Countertops costs in Napa, CA

Expect $14,000 – $45,000 for a full cabinets and countertops project in Napa, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500. Add $800 – $2,500 for a backsplash if you want one, and $3,000 – $10,000 if a new island is part of the plan.
Five things push a job toward the top of that range: total linear footage of cabinetry, whether you’re keeping the existing layout or moving the sink and range (which triggers plumbing and electrical work), the material grade (stock vs. custom, particleboard vs. plywood), whether a permit is required, and the condition of what’s behind the old cabinets.
Every written estimate we hand you lists cabinet boxes, doors, hardware, countertop material, fabrication, install, disposal, and permits as separate lines. What’s not always included by default: specialty storage inserts, appliance panel fronts, and any repair to walls or plumbing found during demo. We note those in the quote rather than surprising you later. Bring us the layout and we’ll put real numbers on paper; the estimate and design consult are free.
See the difference
Before
After
Before
After
Before
AfterWhat Napa homes specifically do to this job
Napa’s housing stock splits into three very different cabinets-and-countertop jobs. In the historic downtown core off First Street and around the 94559 ZIP, we’re often working in late-1800s Victorians and Craftsman bungalows where plaster walls, out-of-plumb framing, and knob-and-tube wiring come as standard. Those jobs need scribing and shimming to make cabinets sit true, and they often need an electrician before the new under-cabinet lighting goes in. North and east of downtown, the mid-century ranches in 94558 are easier to work in but often have stucco and slab issues to plan around.
Out in the hills and the surrounding estate properties, the conversation is different. After the 2017 and 2020 wildfires, plenty of WUI rebuilds and retrofits in Napa are still in progress, and many older homes in the eastern hills still have single-pane windows and wood siding. When we touch a kitchen in those homes, homeowners rightly want to know whether fire-resistant materials and defensible-space compliance need to factor in. That’s a conversation we have before a single cabinet is ordered.
The other thing locals know: Napa runs on the wine industry, and the crush calendar shapes contractor availability. Spring and fall are booked tight with hospitality and tasting-room work, so kitchen projects here tend to move best in the late winter and mid-summer windows. The Mediterranean climate, hot dry summers and cool wet winters, also means we schedule cabinet installs to avoid rain exposure on open walls, and we don’t leave a kitchen sitting open through a wet stretch in January.
Serving Napa, CA – Our Local Coverage Area
We serve Napa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Napa

Plan on six to ten working days of actual labor spread across four to six weeks of calendar time. The wait is fabrication. Stock cabinets ship in one to two weeks, semi-custom in three to five, and stone templating adds another week after cabinets are set. Call (888) 276-8078 for a schedule based on your specific order.
Usually not if you’re keeping the layout and swapping like-for-like. A permit is typically required when you move plumbing or electrical, add a new island with its own circuit, or change the structural opening. We pull the permits and pass the inspections when they apply, and we tell you up front which category your job falls into.
Yes. Most Napa kitchens we work in keep the sink and range where they are, which is the single biggest cost saver. Leaving the layout alone means no new permits, no plumbing rough-in, and a shorter schedule. If you want the sink under a window or the range on another wall, that’s possible, but it changes the estimate and the timeline meaningfully.
Full projects run $14,000 – $45,000. Cabinets alone sit at $4,000 – $13,000, counters at $2,000 – $6,500, an island at $3,000 – $10,000, and a backsplash at $800 – $2,500. Material grade and whether you move plumbing are what push a job to the top of that range. Call (888) 276-8078 and we’ll give you a written line-item estimate at no charge.
Our workmanship is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right for two full years. Cabinet and countertop manufacturer warranties pass through to you on top of that. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every price we quote is fixed with no change orders.
Get a free cabinets and countertops estimate in Napa
Tell us what you’re planning and we’ll come measure, talk through cabinet and countertop options, and leave you with a written estimate you can actually compare against other bids. Calls are answered by a live person 24/7, so you won’t hit voicemail. Finance at 0% for 18 months, and take $1,000 off projects over $10,000. That free estimate and design consult is the best way to start. Call (888) 276-8078 today.
Written by the team at Groundwork Construction Co.












