







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVinyl Fence Cost Per Foot in Vacaville, CA: What You’ll Actually Pay
Vinyl fence in Vacaville runs $28-$38 per foot installed for standard residential panels, and $38-$52 per foot for commercial-grade thick-wall vinyl. On a typical 150-foot residential lot line, that puts most projects between $3,500 and $9,000. The gap between those two tiers isn’t marketing – it’s wall thickness, post spacing, and footing depth, and it decides whether your fence still looks square in year six under Delta-breeze gusts and 100°F August afternoons. Call (888) 276-8078 for a free, upfront estimate that spells out every spec in writing.

Why Vinyl Fence Pricing in Vacaville Isn’t Just About the Panels
Drive the west-facing property lines along the Browns Valley and Nut Tree subdivisions and you’ll see the difference fast. Panels that took the full afternoon sun and the wind coming through the gap between the Coast Range and the valley start to chalk, then hairline-crack, then buckle at the posts. Most homeowners assume vinyl is vinyl. It isn’t.
Vacaville swings from roughly 38°F winter nights to 105°F summer afternoons. Vinyl expands and contracts with every one of those swings. Undersized expansion gaps at panel-to-post connections are the single most common install mistake we correct, and they’re invisible on the bid sheet – which is exactly why we put the gap spec in writing before work starts.
Groundwork Construction Co. of Vacaville treats vinyl the way we treat any structural system: it has to be specified for the site, not pulled off a shelf. Our technicians have up to 12 years of experience, and every job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.
What to Look For in a Vinyl Fence Bid: A Comparison
Here’s how a standard bid and a commercial-grade bid actually differ on paper. Use this as your checklist when you’re comparing quotes.
- Wall thickness: Standard vinyl is 0.080-0.120 inches. Commercial-grade is 0.150 inches or thicker. That’s the spec that matters most.
- Post spacing: Standard is 8-foot on-center. In Vacaville’s wind-gap areas, 6-foot spacing is the better call for lateral load resistance.
- Footing depth: Expansive clay doesn’t care that your fence is vinyl instead of wood. Deeper footings are required either way, and a bid silent on footing depth in this soil is an incomplete bid.
- UV stabilization: Titanium dioxide in the compound resists chalking. Cheap formulations skip it.
- Expansion gaps: The spec that prevents buckling. If it’s not disclosed, ask.
What does “commercial grade” actually mean? It’s not a marketing label. It’s wall thickness at or above 0.150 inches, which resists impact and holds its shape under sustained wind load far better than the 0.080-0.120 inch panels that dominate big-box inventory. It’s also UV-stabilized at a higher level, which is the difference between a fence that fades gracefully and one that goes chalky and brittle by year five.

Vinyl Fence Cost Per Foot in Vacaville: The Line-Item Table
Here’s how the per-foot pricing breaks down into the project totals most Vacaville homeowners actually see. These are the same ranges we quote, with no post-install surprise charges for “site conditions.”
| Item | Price Range |
|---|---|
| Standard residential vinyl, installed (per foot) | $28-$38 |
| Commercial-grade thick-wall vinyl, installed (per foot) | $38-$52 |
| Typical 150-foot residential project, all-in | $3,500-$9,000 |
| Upgraded 6-ft post spacing + deeper footings (wind-gap spec) | Adds to base panel cost |
If you’re comparing vinyl against aluminum, our Fence Installation in Vacaville page covers material trade-offs side by side. Vinyl tends to win on privacy and price; aluminum wins on wind permeability. In the wind-gap areas, that’s a real conversation.
On cost, our rule is simple: the number you see is the number you pay. And with $1,000 off projects over $10,000 plus 0% financing for 18 months, a larger property-line or perimeter job is more accessible than the sticker shock suggests. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail loop on a Saturday morning.
Clay Soil, Footings, and Why the Ground Doesn’t Care About Your Material
Vinyl posts go into the same expansive clay as wood posts, and in the older Browns Valley and Alamo Creek areas that clay moves seasonally. A footing that’s too shallow in this soil tilts the post, and a tilted post racks the whole panel run. We specify footing depth in the estimate and show it to you before any digging starts.
This is also why we install with Fence Installation practices built around the site, not a generic template. Background-checked, uniformed technicians show up, walk the line with you, and confirm the spec. Full-scope, from foundation to finish line, backed in writing.
FAQs: Vinyl Fence Cost Per Foot in Vacaville
Vinyl fence in Vacaville costs $28-$38 per foot installed for standard residential panels and $38-$52 per foot for commercial-grade thick-wall vinyl with heavier UV stabilization. Most full residential projects land between $3,500 and $9,000 depending on footage, post spacing, and footing depth in Vacaville’s clay soil. Call (888) 276-8078 for an exact quote – estimates are free and upfront.
Yes, if your property line takes wind and afternoon sun. The $10-$14 per-foot premium buys wall thickness at 0.150 inches or more instead of the 0.080-0.120 inch standard, which is what keeps panels from chalking, cracking, and buckling under Delta breezes and 100°F summers. Over the life of the fence, the upgrade usually costs less than replacing a premature install. Call (888) 276-8078 to compare both specs on your lot.
It can, because deeper footings are required in expansive clay – and that applies to vinyl just as much as wood. A bid that doesn’t disclose footing depth is an incomplete bid, and that’s where surprise charges come from. We put the footing spec, panel grade, and post spacing in writing before work starts. Call (888) 276-8078 for a free estimate.
A 150-foot residential run typically runs $3,500-$9,000 for standard vinyl, or more if you specify commercial-grade panels and 6-foot post spacing for wind exposure. Exact footage and grade drive the final number. Call (888) 276-8078 and we’ll price it line by line.
Get Your Vinyl Fence Priced Right the First Time
Don’t sign a bid that hides the specs. Get an upfront, written estimate that shows panel grade, post spacing, and footing depth before any work begins. Call (888) 276-8078 – a live person answers 24/7. Free project estimate and design consult, backed by our 730-Day Done Right Promise. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Vacaville, serving Vacaville, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












