







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Vacaville?
Aluminum fence installation in Vacaville typically costs $4,000 to $10,000 for a standard residential lot, and most projects land in the middle of that range. A simple 100-linear-foot front-yard run usually comes in around $4,000 to $5,500, while a full perimeter with gates, sloped runs, and decorative pickets pushes toward the top end. We give you an upfront number before any work begins, so you know what you’re paying before the first post goes in.
That $4,000-$10,000 figure isn’t a guess pulled from a national calculator. It reflects what materials, labor, and permits actually run in Vacaville right now, from the flat lots off Alamo Drive to the hillside properties up near Browns Valley. Call (888) 276-8078 and we’ll walk you through a free estimate built around your specific property line.
Key takeaways
- Most Vacaville aluminum fence projects fall between $4,000 and $10,000.
- Price per linear foot runs roughly $28 to $62 installed, depending on style and height.
- Vacaville’s expansive clay soils and summer heat swing installation cost more than the fence material itself in some yards.
- A new fence over 7 feet needs a permit; most standard 4-6 foot residential fences don’t.
- Your estimate is free, financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.

Aluminum Fence Installation Cost Breakdown (2026)
Aluminum fencing is priced by the linear foot once you’ve chosen your style and height, then added to for gates, tear-out of the old fence, and site prep. Here’s how the numbers shake out in Vacaville for 2026:
| Line Item | Typical Vacaville Range | Notes |
|---|---|---|
| Standard 4 ft aluminum fence | $28-$38 per linear foot | 2-rail or 3-rail residential grade |
| 5 ft aluminum fence | $32-$45 per linear foot | Most common backyard height |
| 6 ft aluminum fence | $38-$52 per linear foot | Pool and privacy runs |
| Ornamental / decorative picket | $45-$62 per linear foot | Custom finials, racked panels |
| Walk gate (4 ft) | $300-$650 each | Self-closing hardware |
| Drive gate (10-12 ft) | $900-$2,200 each | Double swing or sliding |
| Old fence removal & haul-away | $400-$1,200 | Depends on length and material |
| Concrete footings (per post) | $35-$75 | Required in Vacaville’s clay soils |
| Slope / racking charge | $4-$9 per linear foot | Hillside lots |
| Permit (when required) | $150-$450 | Fences over 7 ft or on certain easements |
A typical 120-linear-foot backyard fence in Vacaville with one walk gate and standard tear-out of an old wood fence usually lands between $5,200 and $7,800. Add a drive gate and a sloped run and you’re looking at $8,500 to $10,000.
What pushes cost up: longer runs, taller heights, custom ornamental styles, gates, hillside grading, and removal of a heavy old fence. What brings it down: shorter runs, standard heights, flat lots, keeping an existing fence’s concrete footings, and choosing a stock style over a custom pattern.
These are real Vacaville numbers, not a template. Compare that to vinyl fence installation at $3,500-$9,000 if you’re weighing materials – aluminum tends to cost a bit more upfront but holds its finish far longer in our sun. If you’re deciding between fence types, our fence installation page covers the trade-offs.
What Affects Aluminum Fence Installation Pricing in Vacaville
Two yards the same size can price thousands apart. Here’s what actually moves the number in Vacaville.
- Soil conditions. Vacaville’s expansive clay soil swells and shrinks with the seasons, which means posts need deeper, wider concrete footings to stay plumb through a wet winter and a dry summer. We set footings below the frost-free depth with proper concrete volume – cutting corners here is why some fences lean within two years. Expect footing cost to run $35-$75 per post, and count on one post every 6 to 8 feet.
- Slope and grade. Browns Valley and the hillside neighborhoods off Foothill Drive have real grade changes that require racked panels (panels that follow the slope) or stepped installations. Both add labor and slightly more material, typically $4-$9 per linear foot on the affected run.
- Fence height and style. A 4-foot 3-rail fence is the budget option; a 6-foot ornamental picket with finials and a matching gate is at the top. Height also decides whether you need a permit – anything over 7 feet, or fences near a corner sight line, usually does.
- Gates. Every gate is a small engineering project – hinges, latches, posts sized for the weight, sometimes a concrete pad. A basic walk gate adds $300-$650; a drive gate for an RV or side yard adds $900-$2,200.
- Run length and layout. Longer runs cost more in total but less per foot, since mobilization and setup spread across more fence. A short, complicated 40-foot run with multiple corners can cost more per foot than a clean 150-foot straight run.
- Removal of an existing fence. If there’s an old wood or chain-link fence in the way, removal and haul-away runs $400-$1,200 depending on length and whether the old concrete footings have to come out too.
One local note that surprises a lot of homeowners: Vacaville’s summer heat bakes metal, and a dark-colored aluminum fence in full afternoon sun can get hot enough to be uncomfortable to touch. Lighter colors and powder-coat finishes handle the UV far better and stay cooler. It’s a detail that doesn’t change the price much but makes a real difference in how the fence feels and lasts.

How to Save on Aluminum Fence Installation
Aluminum fencing is a “buy once” material – it doesn’t rot, it doesn’t need staining, and a quality powder-coated finish holds up for decades in Vacaville’s climate. So the smart way to save is on the installation side, not by cheaping out on the fence itself.
- Get the free estimate first, before you commit to anything. A real written estimate tells you the actual per-foot number for your yard instead of a range off a calculator. Ours is free, and it’s the single best way to avoid overpaying. Call (888) 276-8078.
- Combine the fence with other exterior work. If you’re also doing pavers, a driveway, or a patio, bundling the projects into one plan often reduces mobilization cost. Our driveway and pavers team coordinates with fence installs all the time.
- Keep an existing fence’s footings when you can. If the old posts are sound and set at the right spacing, reusing the concrete holes saves removal and re-pour cost. Not always possible, but worth asking.
- Choose a stock style over custom. Standard ornamental patterns cost less than custom finials, spears, or racked panels. Same aluminum, same durability, lower price.
- Take advantage of financing and promotions. We offer 0% financing for 18 months, which spreads a $6,000 fence into manageable monthly payments, plus $1,000 off projects over $10,000 if your project qualifies.
- Do the tear-out yourself if you’re able. Removing an old wood fence is honest labor, but if you’re handy and have a weekend, it saves the $400-$1,200 removal charge. We’ll still set the new posts and panels.
Our technicians bring up to 12 years of experience to every aluminum fence job, and every project is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s a long guarantee, and it means a fence we install doesn’t get a second chance to fail quietly.
Aluminum vs. Vinyl vs. Wood: What Makes Sense in Vacaville?
It’s worth knowing where aluminum sits next to the alternatives before you commit, because the “cheapest” fence isn’t always the cheapest over ten years.
- Aluminum ($4,000-$10,000): Best long-term value in Vacaville’s heat. Powder coating resists fading, it won’t rot or warp, and it needs essentially no maintenance beyond a rinse. Slightly higher upfront than vinyl.
- Vinyl ($3,500-$9,000): Lower upfront cost, good for privacy panels, but vinyl can get brittle in sustained heat and may chalk or crack over many summers. Fine if you want a solid privacy fence.
- Wood: Cheapest to start, but in Vacaville’s dry summers and wet winters, wood fencing needs staining every couple of years and tends to fail at the posts first. Over 15 years, wood usually costs more than aluminum when you add up maintenance.
If you’re weighing a full exterior refresh, pairing a new aluminum fence with fresh roofing or new windows and doors can lift a home’s curb appeal in one coordinated pass. If you’re planning a bigger backyard build, a home addition or ADU often reshapes where fence lines need to go, so it’s worth planning both together. And if you’re updating the interior at the same time, our kitchen remodeling and bathroom remodeling teams work the same way – one contractor, one point of accountability, from foundation to finish line.
Do You Need a Permit for an Aluminum Fence in Vacaville?
Most standard residential aluminum fences in Vacaville don’t require a permit, but taller fences and certain locations do. A fence over 7 feet tall generally needs a permit, and fences near a corner or a driveway sight line may face height limits for visibility. If your property is on a corner lot or backs an easement, check before you build. We handle the permit check as part of a free estimate, so you’re not guessing about the rules.
Two local things to know: fences on or near a drainage easement have to leave access, and HOA neighborhoods scattered around Vacaville – especially in the newer developments – often have their own design and height rules on top of the city’s. We ask about HOA requirements before quoting so the number you see is the number you pay.
How Long Does an Aluminum Fence Take to Install?
Most residential aluminum fence installs in Vacaville take one to three days once materials are on site. A simple 100-foot run with one gate is often a single day for the fence itself, plus footing cure time. Larger, sloped, or multi-gate projects run two to three days. Footings need time to set before panels go up, so we schedule accordingly rather than rushing the concrete – that’s what keeps posts plumb for years instead of months.
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost per foot in Vacaville?
Installed aluminum fence in Vacaville runs about $28 to $62 per linear foot, depending on height and style. Standard 4-foot residential fence sits at the low end; 6-foot ornamental or custom picket sits at the high end. Call (888) 276-8078 for a free per-foot quote on your actual run – the number is exact, not a range.
Is it cheaper to install aluminum or wood fencing in Vacaville?
Wood is cheaper upfront but usually costs more over 10-15 years. Wood fences in Vacaville typically need staining every two to three years and tend to fail at the posts first. Aluminum at $4,000-$10,000 installed needs no staining, no sealing, and no repainting. Add up a decade of maintenance and aluminum generally comes out ahead. Call (888) 276-8078 and we’ll run the numbers for your property.
Can you install an aluminum fence on a sloped yard in Vacaville?
Yes. Sloped yards in neighborhoods like Browns Valley and off Foothill Drive are common, and we handle them with racked panels that follow the grade or stepped installations. Expect a slope charge of roughly $4 to $9 per linear foot on the affected run. A free estimate on site tells you exactly which approach fits your yard.
How much does it cost to add a gate to an aluminum fence?
A walk gate adds $300-$650; a drive gate for an RV or side yard adds $900-$2,200. Gate cost depends on width, hardware, and whether a new post and concrete pad are needed. Call (888) 276-8078 for an exact gate quote – estimates are free.
Do you offer financing on aluminum fence installation in Vacaville?
Yes – 0% financing for 18 months is available on qualifying aluminum fence projects, and projects over $10,000 get $1,000 off. That brings a $6,000 fence down to a comfortable monthly payment. Call (888) 276-8078 to see how the numbers work for your yard.
Why Homeowners Call Groundwork Construction Co. of Vacaville
Aluminum fencing isn’t complicated, but doing it right in Vacaville’s clay soil and summer heat takes discipline – proper footings, correct spacing, and a finish that holds up. Our technicians bring up to 12 years of experience, they’re background-checked and arrive in uniform, and every job is backed by the 730-Day Done Right Promise. We answer calls with a live person 24/7, so you’re never stuck in a voicemail loop, and our pricing is upfront with no surprises.
We serve homeowners across Vacaville and the surrounding area – see our Vacaville service area page for the neighborhoods we cover. If fencing is part of a larger exterior project, we handle the whole scope from foundation to finish line, and you can start at our home page to see all seven of our service lines. When you’re ready for a real number, call Groundwork Construction Co. of Vacaville at (888) 276-8078 for a free estimate – we’ll give you an upfront price and a plan you can count on.
Pricing reflects the Vacaville market as of 2026. Groundwork Construction Co. of Vacaville offers free estimates – call (888) 276-8078.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












