







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Fairfield, CA: What It Costs and How Long It Takes
A chain link fence in Fairfield typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are finished in two to four days once materials land on site. That range covers demolition of an old fence, posts set in concrete, galvanized or vinyl-coated mesh, gates, and haul-away. The number moves with linear footage, height, gate count, and how hard your property line is to reach. Call (888) 276-8078 for a free on-site estimate.
How the Job Actually Runs, Start to Finish

Chain link is fast work, but the sequence matters. Here’s how a typical Fairfield job moves through five stages.
Stage 1: Site walk and property line check (day 1, about 60 minutes)
We walk the line with you, confirm where the fence actually goes, and look for the things that slow a job down: buried irrigation, a shared fence with a neighbor, a slope that changes post depth, or an alley gate you still need to work. You decide fence height and gate placement here. If any part of the line touches a neighbor’s property, this is when that conversation happens.
Stage 2: Utility locate and permit (days 1 to 3)
We call 811 for underground utility marking before any digging. In Fairfield that locate is not optional – the 94533 and 94534 cores have gas, water, and irrigation lines running close to lot lines. If the fence exceeds six feet or sits on a corner lot with sight-distance rules, we pull the permit. You don’t do paperwork.
Stage 3: Demo and post setting (days 1 to 2 of on-site work)
Old fence comes out, posts go in. Post holes are dug to depth, set in concrete, and left to cure. On clay-heavy Fairfield lots we oversize holes slightly to prevent frost-style heave and leaning posts. Gates get their heavier posts on a deeper set. Expect the loudest day to be this one.
Stage 4: Rails, mesh, and tension (day 3)
Top rail, bottom rail, and mesh get stretched and tensioned with a come-along. This is the stage that separates a fence that stays tight for fifteen years from one that sags in year three. Terminals, corners, and gates get the reinforced bracing. We tension and re-tension before we leave.
Stage 5: Gates, hardware, and walkthrough (day 4)
Gate hinges, latches, and any self-closing or locking hardware go on. We open and close every gate with you, check clearances against the ground so nothing drags, and walk the line. You sign off on a fence you’ve physically tested, not one you drove past.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link isn’t one product. Here’s the honest trade-off on each choice.
- Galvanized vs. vinyl-coated mesh: Galvanized is the cheaper, longer-standard option and handles Fairfield’s dry summers well. Vinyl-coated (black or green) adds roughly 15 – 25% to the material cost but reads cleaner against landscaping and won’t leave rust streaks when it eventually weathers.
- Height: Four feet is standard for a residential line; five feet is the usual step up for dogs; six feet is the security height and also the point where a permit is often required. Pick based on what you’re keeping in or out.
- Gauge: 11.5-gauge wire is the residential standard. 9-gauge is heavier and harder to cut or climb, and costs more per foot. Worth it on a corner lot or a rear line that faces an alley.
- Post grade: Standard SS20 posts work on a straight residential run. SS40 heavier-wall posts are the right call for gate posts and any span over ten feet, especially where the Suisun wind corridor pushes on a west-facing line.
- Gates and hardware: Walk gates, double drive gates, and rolling gates are all on the table. If the gate has to lock, we spec a keyed latch or a self-closing hinge rather than bolting on a padlock and calling it done.
- Top rail and tension wire: A top rail keeps the mesh from sagging; a bottom tension wire keeps animals from pushing through. Both are line items, not extras we hide.
What a Chain Link Fence Costs in Fairfield, CA

Residential chain link in Fairfield lands between $3,500 and $9,000 for most jobs. A small side-yard line on a 94534 lot sits at the low end. A full perimeter with two gates on a larger Green Valley parcel sits at the top.
What moves the number:
- Linear footage and height: the biggest lever. A six-foot line costs roughly 25 – 35% more per foot than a four-foot line, and the post spacing tightens.
- Gate count and type: each walk gate adds real cost; a double drive gate with heavier posts can add $800 – $1,500 on its own.
- Site access: a rear line that backs onto an alley or a shared driveway is slower to reach. Tight side yards on older 94533 lots mean hand-carrying material instead of driving up to the line, and that time shows up in labor.
- Demo and haul-away: tearing out an existing fence and disposing of it adds $400 – $900 depending on the length and whether the concrete footings have to be broken out.
- Terrain and soil: slopes, tree roots, or rocky ground near Suisun Valley push up digging time.
A written estimate from Groundwork lists footage, height, gauge, post spec, gate count, demo, haul-away, and permit – each on its own line. Upfront pricing means the number on the estimate is the number you pay. The written estimate excludes anything you didn’t ask for, and we tell you what we left out before you sign. That’s the 730-Day Done Right Promise at work: if we get it wrong, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Fairfield Homes Specifically Do to This Job
Fairfield is not a flat suburban grid, and the fence work reflects that. On the older ranch and tract homes near downtown and the 94533 core, the side yards are narrow and the property lines are old – often with a shared fence the neighbor half-owns, which means a chain link replacement has to negotiate that line before a single post goes in. On the newer 94534 and Cordelia subdivisions, HOA rules govern fence height, color, and material, so a vinyl-coated black mesh is often the only version the association will approve. Out toward Suisun Valley and Green Valley, the hillside parcels sit in the wildland-urban interface, where Solano County fire and hillside rules mean fence lines often double as defensible-space edges – you don’t want vegetation pressed against a chain link line if it’s your fire-clearance boundary. And the Suisun Marsh wind corridor is real: west-side jobs get a strong afternoon delta breeze, so we schedule post concrete and mesh tensioning around the gusts instead of fighting them. The county permitting follows the fence height and location, not the material, so a four-foot line usually clears without a permit and a six-foot corner lot typically doesn’t.
If you’re planning a chain link run as part of a full Fence Installation in Fairfield, we scope the whole property at once. And on a lot where you’re wiring a gate or extending a service line, the electrical and trenching work is the same crew that handles ADU Site Prep & Utilities in Fairfield – homeowners often pair this with that. We also see a lot of homeowners pairing a new fence with an entry update; that’s where Door Installation in Fairfield comes in.
Serving Fairfield, CA – Our Local Coverage Area
We serve Fairfield and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Fairfield

Most residential chain link jobs in Fairfield are done in two to four days on site. Post concrete needs a day to cure before mesh goes up, so a typical job is: day one for demo and posts, day two for rails and mesh, day three for gates and walkthrough. Large perimeter jobs on hillside parcels add a day. Call (888) 276-8078 for a real timeline on your line.
It depends on height and location. A four-foot residential line usually doesn’t require a permit; a six-foot fence or a corner lot with sight-distance rules typically does. HOA-approved subdivisions in 94534 may also require architectural review on top of the city permit. We handle whichever applies and tell you which one before work starts. Call (888) 276-8078 to find out which applies to your property.
Yes – chain link is one of the least invasive fence types because posts are narrow. We call 811 for a utility locate before digging, and we plan post placement around irrigation, gas, and water lines. We don’t move plumbing, electrical, or structure for a fence job. The only real disruption is the post holes and the haul-away. Call (888) 276-8078 to schedule a free estimate.
Residential chain link in Fairfield runs $3,500 to $9,000 for most jobs, with the price driven by footage, height, gate count, demo, and site access. A small side-yard line is at the low end; a full perimeter with two gates on a hillside parcel is at the top. You get a written line-item quote before work starts, and the number on it is the number you pay. Call (888) 276-8078 – estimates are free.
Every chain link fence we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship: post set, tension, gate alignment, and hardware for the full 730-day period. Material warranties come from the manufacturer and pass through to you in writing. Call (888) 276-8078 for the full terms.
Get a Free Chain Link Fence Estimate in Fairfield
We’ll walk your property line, measure the run, confirm height and gate locations, and hand you a written line-item estimate for chain link fence in Fairfield – footage, gauge, post spec, demo, haul-away, permit, each on its own line. Upfront pricing means no surprises after the first day. Call (888) 276-8078 to schedule your free on-site estimate. A live person answers, 24/7. One of our Fence Installation specialists serves every Fairfield ZIP and surrounding areas – see our Fairfield page.
Written by the team at Groundwork Construction Co.












