







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Dixon, CA: What the Job Actually Involves
Door installation in Dixon, CA runs $850 to $4,200 per opening depending on material, size, and whether we’re resetting a frame or cutting a new one, and most single-door jobs finish in one to two days. Entry doors, interior doors, custom wood, and carriage-house styles all fall inside that spread. If you’re reading this because a door sticks, sags, or no longer closes square, that’s the conversation to have before anything gets ordered. Call (888) 276-8078 and we’ll put a real number on it after we’ve seen the opening.
How We Run a Door Installation, Start to Finish

Every door project moves through the same five stages. Here’s what happens and when, so you know what you’re deciding and when you need to decide it.
Stage 1: Measure and site visit (day 1). We check the rough opening, confirm wall thickness, measure the reveal on all four sides, and photograph the framing so we know what we’re dealing with before we order. On older downtown Dixon homes, this is also where we find out whether the existing frame is plumb or whether the wall has settled. You decide the door style and swing direction at this stage, not later.
Stage 2: Material order and lead time (day 1 to 4 weeks). Standard slab and pre-hung doors arrive in about a week. Custom wood, carriage-house styles, or anything with a specialty finish run three to six weeks. We give you the lead time in writing before you commit, so nothing gets promised that the supplier can’t deliver.
Stage 3: Prep and demo (day of install, morning). We remove the old door and trim, inspect the rough opening, repair any rot or framing damage, and shim the frame square. On exterior doors we verify the threshold and flashing detail before the new unit goes in. This is the half-day most people underestimate, and it’s where a rushed install goes wrong.
Stage 4: Set, shim, and seal (day of install, afternoon). The door goes in, we shim the hinges and lock side, confirm the reveal is even, and seal the exterior perimeter. Hardware gets mounted and tested. We adjust until the door latches with one push and swings without a rub.
Stage 5: Trim, finish, and walkthrough (day 2). Casing and trim go up, finish work is completed, and we walk the door with you: swing, latch, weather seal, and finish. You sign off on the door in the opening it lives in, not from a photo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Options, and What Each One Costs You
Door choice drives both the price and how long the door lasts. Here’s the honest read on each.
- Solid wood entry doors. The premium pick for custom homes. Beautiful grain, takes a stain finish, and pairs well with carriage-house styles. The trade-off is maintenance: in Dixon’s dry summers and damp tule-fog winters, wood needs refinishing every few years to keep from checking.
- Fiberglass entry doors. Holds a stain or paint finish, resists swelling and cracking, and handles temperature swings well. It won’t have the same heft as solid wood, but it holds up with far less upkeep.
- Steel entry doors. The most secure and the most affordable of the exterior options. Takes paint well but can dent, and it needs a good weather seal to keep the fog out.
- Interior doors (hollow-core vs. solid-core). Hollow-core keeps cost down and works fine for closets and secondary rooms. Solid-core blocks sound and feels substantial; worth the upgrade for bedrooms and home offices.
- Hardware and finish. Handleset grade, finish (satin nickel, oil-rubbed bronze, matte black), and smart-lock integration all move the number. A smart lock adds convenience but requires a compatible backset, which we confirm before ordering.
- Carriage-house and custom styles. These are a look, not a category. They typically mean a fiberglass or wood door with decorative strap hinges, a stained finish, and a specific trim package. The style premium is real, but so is the curb appeal.
What Door Installation Costs in Dixon, CA

Most door installations in Dixon land between $850 and $4,200 for a single opening. That’s the honest spread, and here’s what pushes a job toward one end or the other.
- Door material and grade. A hollow-core interior door sits at the low end. A solid wood or fiberglass exterior entry door sits at the high end.
- Opening condition. A straight, plumb rough opening is quick. A settled frame, rot, or a wall that needs reframing adds labor and time.
- Frame and trim work. Resetting a frame or adding new casing and trim adds cost. Reusing existing trim keeps it down.
- Hardware and finish. Standard hardware is included in the base range. Smart locks, premium handlesets, and custom finishes add to it.
- Permit scope. A like-for-like swap usually doesn’t need a permit. A new opening, a change to the wall, or a structural change does, and that adds inspection time and cost.
A written estimate from us lists the door, hardware, labor, trim, and disposal as separate line items. What’s typically not included: structural reframing, drywall repair beyond the trim line, and painting the surrounding wall.
See the difference
Before
After
Before
After
Before
AfterWhat Dixon Homes Specifically Do to This Job
Dixon’s housing stock splits the work in two. Older single-story homes downtown often have settled frames and out-of-square openings, which means more prep time and a higher chance the job moves past a simple swap. Newer two-story stucco subdivisions on the edges usually have square openings and go faster, but the attached garages and shop buildings on acreage are a different story. Much of Dixon’s building happens on unincorporated or edge-of-town parcels, and that’s where county jurisdiction versus city jurisdiction changes the permit path. A door on a well house or a shop outbuilding isn’t the same permit question as a front door on a downtown home. The hot, dry summers and damp tule-fog winters also mean exterior doors need a good weather seal and a finish that handles both. If you’re pairing a door replacement with a wider project, that work is part of a full Windows & Doors in Dixon scope, and our Windows & Doors service covers the rest of the openings.
Serving Dixon, CA – Our Local Coverage Area
We serve Dixon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Dixon

A single door typically takes one to two days from demo to finish. Custom wood or carriage-house doors add three to six weeks of lead time before install day, so plan the whole timeline, not just the install. Call (888) 276-8078 and we’ll confirm the lead time for your door.
A like-for-like door swap usually doesn’t require a permit. A new opening, a change to the wall framing, or a structural change does, and on unincorporated parcels the county versus city jurisdiction decides which office you’re dealing with. We confirm the permit path before work starts.
Yes, in most cases. A standard door replacement uses the existing opening and doesn’t touch plumbing or framing. If the opening is out of square or the wall has settled, we may need to reframe, and we’ll tell you that before we start, not after.
Most single door installations in Dixon run $850 to $4,200, with the range driven by material, opening condition, and hardware. A hollow-core interior door sits at the low end; a solid wood or fiberglass entry door sits at the high end. Call (888) 276-8078 for an exact quote – estimates are free.
All our door installations are covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If the door doesn’t swing, latch, or seal the way it should, we make it right. That’s the written commitment, not a verbal one.
Get a Free Door Installation Estimate in Dixon
If you’re ready to put a real number on your door project, call (888) 276-8078 for a free on-site estimate. We measure the opening, walk through your material and hardware options, and hand you a written line-item quote with upfront pricing – the number you see is the number you pay. Calls are answered by a live person, 24/7. If you’re weighing a wider project, homeowners often pair this with Cabinets & Countertops in Dixon or a Garage Conversion ADU in Dixon. We cover Dixon and the surrounding Solano County area.
Written by the team at Groundwork Construction Co.












