







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Clayton, CA: What It Costs and How Long It Takes
A chain link fence in Clayton, CA typically runs $3500 – $9000, with most residential lots landing around $4,800 for 150 – 200 linear feet of galvanized 4-foot fence with a walk gate and a drive gate. Smaller runs on a flat downtown-core lot can come in near the bottom; long boundary lines on a sloped hillside parcel push toward the top. Installation usually takes one to three days on site once materials are staged. Call (888) 276-8078 and we’ll walk your property and price the exact run.
How a Chain Link Fence Goes In, Stage by Stage

Chain link is the least fussy fence we build, but the sequence still matters. Here’s what actually happens between the estimate and the last tension band.
1. Estimate and layout (day 1, one to two hours)
We walk the line you want, check property corners against your plat map, and flag setback and easement issues before anyone digs. You decide the height (4, 5, or 6 feet), the gate locations, and whether you want a top rail. If the run crosses a slope, we note where the fence will rack and where it needs stair-stepping. That measurement drives the quote.
2. Utility locate and permit check (two to five business days before install)
We call 811 for a free mark-out of underground lines. This is the stage most homeowners don’t plan for, and it’s the one that can stall a job. In older Clayton parcels the mark-out can come back with surprising results. If your fence is over 6 feet, within a front-yard setback, or near a drainage easement, we pull a permit and schedule the inspection. Otherwise most residential chain link goes in without one.
3. Demo and post setting (day 1 on site)
Old fence and concrete footings come out first. We set posts in concrete at 8-foot spacing, 24 to 30 inches deep depending on soil and wind exposure, and let them cure overnight. On a Clayton hillside lot, that means digging into clay and rock, and sometimes hand-augering where a machine can’t reach.
4. Framing and mesh (day 2 on site)
Top rail, tension bands, and the fabric go up. We stretch the mesh by tension bar and come-along so it stays taut, then trim and finish the terminals. Gates get their frames hung and swing-checked. A 200-foot residential run takes one crew day.
5. Walkthrough and cleanup (same day)
We walk the finished line with you, confirm the gate latches and swings true, and haul off all the old material. Any punch items get handled on the spot. Your workmanship is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Chain link is not one product. These are the real decisions that separate a $3,500 job from a $9,000 one.
- Height: 4 ft vs 5 ft vs 6 ft. Four-foot is standard for a residential lot line and the least expensive. Five-foot reads more as containment for a dog. Six-foot is what most insurance carriers and code reviewers want for pool barriers, and it’s also the height that most often triggers a permit. Each step up adds roughly 8 – 12% to material and labor.
- Gauge of the mesh and the pipe. Heavy-gauge (11.5 ga) fabric with Schedule 40 posts costs more but resists bending and lasts longer in a wind-exposed yard than the light residential grade (12.5 ga) that most big-box kits use. On the Diablo Range hillside lots, thicker is worth the difference.
- Finish: galvanized vs vinyl-coated. Plain galvanized is the cheapest and the most durable bare finish. Vinyl-coated (black or green) costs a few hundred dollars more on a typical run and gives a cleaner look against landscaping. Both hold up well through Clayton’s dry summers.
- Gates. A walk gate runs a few hundred dollars; a drive gate sized to a standard vehicle costs more. On steep driveways the gate has to be set plumb on the slope, which may need a custom frame.
- Top rail and tension wire. A top rail stiffens the fence and keeps the mesh from sagging. A bottom tension wire is a cheaper substitute that still keeps a dog from pushing underneath.
What Chain Link Fence Costs in Clayton, CA

Residential chain link in Clayton runs $3500 – $9000 installed. Here’s what moves a quote to the low or high end.
| Line item | Typical range |
|---|---|
| 150 – 200 ft, 4 ft galvanized, one walk gate | $3,500 – $5,200 |
| 200 – 300 ft, 5 – 6 ft, walk gate + drive gate | $5,200 – $7,500 |
| 300+ ft with hillside racking or stair-step | $7,500 – $9,000 |
| Old fence demolition and haul-away | Add $300 – $800 |
| Permit (only if 6 ft, pool, or setback) | Add $150 – $500 |
The variables that push the number: linear feet (the biggest lever), terrain (sloped runs need more posts and more time), gate count and size, material grade, and permit scope. A written estimate lists posts, fabric, rails, gates, concrete, demo, and disposal as separate lines so you see where the money goes. What’s typically not included: landscaping repair after install, tree or stump removal in the fence line, and any retaining wall the fence needs to sit on.
See the difference
Before
After
Before
After
Before
AfterWhat Clayton Specifically Does to a Chain Link Fence Job
Clayton is a small, semi-rural enclave against Mount Diablo (ZIP 94517), and its parcels don’t behave like neighboring Concord’s. The flat downtown-core ranch homes from the 1960s – 80s give you clean, straight property lines and easy access. Head uphill and everything changes: custom owner-built houses on large sloped lots with non-standard corners, no clear plat map, and lots that require hillside and wildfire review. On the streets off Mount Diablo Scenic Boulevard, driveways often exceed 15% slope with no turnaround, so a concrete truck can’t just pull up. We plan staging and sometimes hand-mix or wheelbarrow footings to get posts set. Fire season adds another layer: red-flag days restrict grading and welding, so summer scheduling has to flex around the county’s burn restrictions. Winter rains saturate the clay soil on those slopes and can delay post-setting by a week or more. If a fence line also involves utility trenching or grading work, ADU Site Prep & Utilities in Clayton is often scoped alongside it so the underground work is coordinated once.
Serving Clayton, CA – Our Local Coverage Area
We serve Clayton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Chain Link Fence in Clayton

Most residential chain link in Clayton takes one to three days on site. A straight 150-foot run on a flat lot is a single day for the install crew after the utility mark-out clears. Hillside lines with racking and custom gate frames stretch to three. The estimate and the 811 call add up to a week on the front end.
Usually not if the fence is 6 feet or under and sits inside your side or rear setback. A six-foot fence, a pool barrier, or anything in the front-yard setback typically needs one, and the inspection is a quick pass. We check the setback and easement rule against your plat before we quote.
Yes. Standard chain link posts are set in individual holes and don’t require trenching. We always call 811 first so we know where the gas, water, and electrical lines run. If a post has to land within 18 inches of a marked line, we shift the spacing rather than hand-dig near it. Underground utility relocation is a separate job, and ADU Site Prep & Utilities in Clayton covers that scope.
Most Clayton residential chain link lands between $3,500 and $9,000 installed, depending on length, height, terrain, and gates. A flat backyard run at the low end is common; a long hillside boundary at the high end is too. Call (888) 276-8078 for an exact quote, and the estimate is free.
Every chain link fence we build is covered by the 730-Day Done Right Promise. If a post works loose, a gate sags, or the tension slips, we come back and fix it. Material warranties come from the fabric and pipe manufacturers on top of that.
Get a Free Chain Link Fence Estimate in Clayton
Call (888) 276-8078 to schedule a free on-site estimate for your chain link fence in Clayton. A live person answers around the clock, and we’ll set a time that works around your parking and access situation. On the visit we’ll walk the line, check for setbacks and utility issues, and hand you a written, line-item quote with no surprises. If the fence is part of a bigger plan, our Fence Installation in Clayton page lays out the wider scope, and you can see all of our Fence Installation work and the surrounding areas we cover on the Clayton service page. Homeowners often pair this with Door Installation in Clayton when they’re closing off a side yard gate at the same time.
Written by the team at Groundwork Construction Co.












