







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Brentwood, CA
Asphalt Driveways & Resurfacing in Brentwood typically runs $3,500 – $9,000 for new asphalt paving and $5,000 – $14,000 for a full driveway replacement, with sealing and resurfacing of an existing surface sitting far below that. Most driveways take two to four days of on-site work, then a short cure window before you park on them. Call (888) 276-8078 for a free on-site estimate with a written line-item quote.
How we build and resurface an asphalt driveway, stage by stage

Every job starts with a walk of the existing surface. On new construction in Brentwood we’re usually looking at bare graded ground; on a resurface we’re reading the cracks, the settling and the water lines to decide whether an overlay will hold or the base has to come up. Here’s the sequence we run, and where you make decisions.
Stage 1: Site evaluation and layout (day 1, about 2 – 3 hours)
We measure the drive, check the slope for drainage, and probe the base to see how much aggregate is already there. You decide the driveway width here, typically 12 to 16 feet for a two-car approach, and whether you’re adding an apron, a turnaround or a widened parking pad. On former orchard land, this is also when we flag surprises: old irrigation lines, land-leveling grades and unrecorded ag-era drain tiles that never made it onto the subdivision plat. Those get handled before anything else is poured or compacted.
Stage 2: Demolition and excavation (day 1 – 2)
Failed asphalt comes up with a skid steer and goes out on a dump trailer. On a new build we excavate to depth and cut the grade so water sheds away from the garage slab, not toward it. Brentwood’s hot inland summers mean we schedule excavation for early morning; by midday the ground is baked hard and a skid steer can skate on the surface instead of cutting into it.
Stage 3: Base prep and compaction (day 2 – 3)
This is the stage that decides whether the asphalt lasts. We lay 4 to 6 inches of Class 2 aggregate base, water it, and compact in lifts so the whole structure holds when the soil shifts. Your decision here is depth: a heavier base costs more on paper and pays for itself in a driveway that doesn’t rut in year three. On ground that was irrigated for decades, drainage corrections usually show up in this stage.
Stage 4: Hot-mix paving (day 3 – 4)
We bring hot-mix asphalt from the plant at 2 to 3 inches compacted depth for a residential drive, screed it, and roll it with a steel drum and a pneumatic roller while it’s still workable. Asphalt goes down hot and is unforgiving if it cools too much before compaction, so the delivery schedule matters. You decide here on grade: standard, or a fiber-reinforced mix for a driveway with heavy vehicle traffic.
Stage 5: Cure and sealing (day 4, then a waiting window)
You stay off the new surface for 24 to 48 hours and keep heavy loads off it for roughly a week. Fresh asphalt needs a full season to cure before sealcoat, so most Brentwood homeowners schedule sealing the following spring rather than the same month.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that shape an asphalt driveway
You’re picking between a few real options, and the trade-offs aren’t cosmetic.
- New asphalt vs. an overlay. A full new asphalt surface with fresh base runs $3,500 – $9,000 and gives you the longest life. An overlay over sound existing asphalt costs a fraction of that, but only works if the base is intact and the cracks have been addressed; a driveway with structural failure under an overlay fails through it within a couple of years.
- Base depth. 4 inches of aggregate base handles a standard passenger driveway. Bump to 6 inches for an RV pad, a boat trailer, or a property with delivery trucks, and expect to pay accordingly.
- Mix type. Standard hot-mix is the default. A fiber-reinforced mix costs more per ton but resists cracking better on expanding soils, which matters on former farmland.
- Resurfacing (sealcoat). A protective sealcoat runs $250 – $700 for most Brentwood drives and buys you several more years of surface life. It’s maintenance, not construction, so we quote it separately.
- Edging and drainage. Asphalt curb, a channel drain, or a swale out to the yard. On a Brentwood lot that was graded for agriculture, getting water to move away from the slab is often the single biggest line item.
What Asphalt Driveways & Resurfacing costs in Brentwood, CA

Here’s the range you’re working with, line by line:
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement (demo + new base + new surface) | $5,000 – $14,000 |
| Driveway sealing / resurfacing | $250 – $700 |
Five things push a Brentwood job toward the low or high end. Square footage is the biggest driver: a single-car apron is a different job than a 1,200-square-foot circular drive. Existing condition matters on resurfacing, since a drive with structural failure means demo, not an overlay. Base and soil conditions on former orchard land often require drainage corrections that nobody budgeted for. Access matters too; a narrow side yard or a fence that has to come down adds labor. Permit scope runs up the number when the driveway ties into a city right-of-way and needs an encroachment permit.
Every written estimate we hand over lists mobilization, demo, haul-off, base material, compaction, asphalt tonnage, and edging as separate lines. What a written quote may not include: landscape repair after excavation, gate or fence reinstallation, and any utility relocation if we hit something unexpected underground. We flag those before work starts, not after. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood homes specifically do to this job
Brentwood is a town that was orchards two decades ago and is subdivisions now, and that has real consequences for a driveway. Large master-planned communities have gone in on land that was irrigated for generations; when we excavate a new drive in those neighborhoods we hit old irrigation lines, grading changes left over from land leveling, and occasionally an unrecorded ag-era well or drain tile that was never drawn onto the subdivision map. Antioch infill lots rarely produce that. Prepping a drive in Brentwood means reading the ground before we trust it, and we build drainage into the plan from the start.
The climate does its part too. Inland East Contra Costa bakes through hot, dry summers and then takes winter rain in concentrated bursts, so a driveway has to shed water fast or the base softens underneath. Expansive soils that move with that wet-dry swing need proper base depth and, on some lots, a fiber-reinforced mix to hold up. We schedule excavation and paving around the heat in July and around wet weather from December into March; fresh asphalt laid into a rain window is money thrown away. Most homes we work on in Brentwood are late-1990s through 2020s stucco-and-tile builds in the planned communities, where the driveway is the original one from construction and has spent twenty-plus years taking sun. That’s how we end up doing more resurfacing and full replacement here than patching.
If the driveway is part of a larger exterior plan, you can bring us the whole scope through our Driveway & Pavers in Brentwood page, or start higher up with our Driveway & Pavers service. Homeowners often pair an asphalt drive with a Chain Link Fence in Brentwood along the property line, and new construction or an outbuilding usually starts with ADU Site Prep & Utilities in Brentwood before the driveway goes in. We cover Brentwood and the surrounding East Contra Costa towns with the same crew standards.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Asphalt Driveways & Resurfacing in Brentwood

Most residential asphalt driveways in Brentwood are two to four days of on-site work, plus a 24- to 48-hour cure before you drive on them. A simple resurface takes a single day when the base is sound. Call (888) 276-8078 and we’ll walk your property and give you a firm schedule with the estimate.
Often yes, and it depends on whether the driveway ties into the city right-of-way. A driveway apron that crosses the sidewalk or curb typically requires an encroachment permit and an inspection; work entirely on private property behind the property line usually doesn’t. We pull the permits and pass the inspections on every job that needs them, and your written estimate spells out what’s covered.
Yes, when the base under the existing asphalt is still intact and the failures are surface-level. If we find structural cracking or settling, an overlay will fail through within a couple of years, and replacement is the honest answer. We’ll show you what we’re seeing and quote both options. Call (888) 276-8078 to schedule the evaluation.
New asphalt paving runs $3,500 – $9,000, full replacement $5,000 – $14,000, and resurfacing or sealing $250 – $700 depending on the condition of the existing surface. Square footage, base depth and soil conditions are the biggest swing factors on any Brentwood property. Call (888) 276-8078 for an exact quote – estimates are free.
Our work is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right, and that’s one of the longest workmanship guarantees in the residential construction space. Your written estimate also documents what’s covered and for how long. Call (888) 276-8078 for the details in writing.
Get a free asphalt driveway estimate in Brentwood
Call (888) 276-8078 for a free on-site estimate on Asphalt Driveways & Resurfacing in Brentwood. A live person answers, day or night, and we’ll ask about the existing surface, the size of the drive and whether water runs toward the garage. Then we come out, measure, probe the base, and hand you a written line-item quote with the full scope in plain numbers.
Written by the team at Groundwork Construction Co.












