







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Brentwood, CA: Answer First
Door Installation in Brentwood, CA usually runs $450 to $1,600 per opening for a standard interior or exterior door, and most single-door jobs are finished in one day. We handle the measure, the tear-out, the framing and shim work, and the hardware set, then leave you with a door that latches clean and seals tight. Call (888) 276-8078 for a free on-site estimate. The number you hear is the number you pay, backed by our 730-Day Done Right Promise.
How our door installation process actually runs, start to finish

Door work is fussy work. The difference between a door that swings true for fifteen years and one that drags by spring is all in the prep, so here’s exactly what happens, in order, and what we need from you along the way.
Stage 1: Measure and site check (about 45 minutes)
We measure the rough opening, check the wall for plumb and square, and look at what’s behind the trim. In Brentwood’s late-1990s-and-newer stucco homes, that often means checking for a warped header or a slab that’s drifted. You decide the door style and material here, and we tell you on the spot whether the opening can take a standard size or needs a custom slab.
Stage 2: Order and lead time (3 to 10 business days)
Stock interior doors are quick; a pre-hung exterior door with a specific finish or a custom size takes longer. You’ll pick hardware, finish, and glass options now, because those affect the order, not the install day. We confirm the delivery window before we schedule anything.
Stage 3: Tear-out and prep (1 to 3 hours)
We pull the old door and casing, inspect the framing and sill for rot or water damage, and repair what we find before anything new goes in. On exterior doors, this is also where we flash and seal the threshold, which is the single biggest factor in whether the door leaks in Brentwood’s winter rains.
Stage 4: Hang and set (2 to 4 hours)
We set the door plumb, shim it, and check the reveal all the way around. Hardware gets installed and adjusted, the latch and deadbolt line up, and the weatherstripping seats against the stop. You get to swing it yourself before we’re done.
Stage 5: Trim, seal, and final walk (1 to 2 hours)
Casing and trim go back on, we caulk and paint the touch-up areas, and we walk the job with you. If it’s a permitted exterior opening, we schedule the inspection. Most jobs finish the same day; a door that needs framing repair can stretch to two.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for a Brentwood door
Not every budget needs the same door. Here’s the honest trade-off on the choices that actually matter, so you’re not guessing at the counter.
- Hollow-core interior doors – the standard choice for bedrooms and closets, light and inexpensive, but they dent and don’t block sound well. Fine for a hall closet, thin for a home office.
- Solid-core interior doors – heavier, quieter, and they hold up to daily use far better. Worth the upgrade on bedrooms and bathrooms, especially in busy households.
- Fiberglass exterior doors – the workhorse for Brentwood’s hot-summer exposure; they resist warping and don’t need repainting as often as wood. A strong default for front and back entries.
- Steel exterior doors – the security pick, and a good match for side entries and garage-to-house doors where you want a deadbolt to feel solid. They can dent, so placement matters.
- Wood exterior doors – the best look, and the most maintenance. In intense East Contra Costa sun they need periodic sealing, so pick these for a covered entry, not a fully exposed one.
- Glass and sidelight options – a door with glass or sidelights brings in light but adds cost and a fraction less security. Decide if the light is worth it for that particular wall.
- Hardware and finish – a lever set, a deadbolt, and a finish that matches the rest of the house. Brand examples we install include Delta and Moen hardware for a coordinated look that holds up.
What Door Installation costs in Brentwood, CA

Expect $450 to $1,600 per door installed, with most single interior doors landing near the low end and a pre-hung exterior door with glass and new hardware pushing toward the high end. A five-door package across a house typically runs $2,800 to $6,500 depending on material and condition.
Here’s what moves the number, in plain terms:
| Factor | Effect on price |
|---|---|
| Door material (hollow-core vs. solid vs. fiberglass/steel) | Low end for hollow-core interior; high end for exterior fiberglass or steel |
| Standard size vs. custom opening | Custom adds roughly $150-$400 per door |
| Existing condition (rot, out-of-square framing, water damage) | Repairs can add $100-$500 per opening |
| Hardware and glass | Adds $50-$350 depending on the set |
| Permit scope (exterior, structural changes) | Adds the permit fee and inspection time |
Our written estimate breaks each line item out, so you see the door, the labor, the hardware, and the permit as separate numbers. If work uncovers rot we didn’t see at measure, we tell you before we touch it, and you approve the change in writing. No surprise line items after the fact. Call (888) 276-8078 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood homes specifically do to a door installation
Brentwood’s housing stock is mostly late-1990s to 2020s stucco-and-tile homes in large master-planned communities, plus a small older core near downtown along First and Second Streets. That mix means most of our door work here is on subdivision homes where the original doors have aged out after a decade or two of hot summers. The intense inland sun warps cheaper exterior doors and dries out weatherstripping, so front and back entries are where we see the most failures. Interior doors swell in the wet season and stick in summer, a swing that’s really a slab settling issue, not a door defect.
Newer Brentwood subdivisions also come with HOA rules that shape exterior door color, style, and even hardware finish on street-facing entries, so we check those before you order anything. On the ranch parcels and newer phases at the edge of town, an exterior door replacement may need a permit and inspection; interior swaps usually don’t. When that wider scope grows, it’s part of a full Windows & Doors in Brentwood project, and homeowners often pair entry work with Cabinets & Countertops in Brentwood during the same remodel. We’re a Windows & Doors contractor covering all of Brentwood, and if you’re reworking a garage door into living space, that pairs with Garage Conversion ADU in Brentwood.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Brentwood

Most single doors are installed in one day, usually 4 to 7 hours from tear-out to final trim. A whole-house swap of five interior doors can take two days. If framing repair or a permit inspection is involved on an exterior door, plan on an extra day.
Interior door replacements typically don’t require a permit. Exterior door replacement, especially one that changes the opening size or involves structural work, often does, and we pull it and schedule the inspection as part of the job. We confirm the requirement for your specific address before we start.
Yes. A standard same-size replacement fits the existing opening with no plumbing or structural work at all, which is why it’s one of the cleaner upgrades we do. If you want to add a door in a new wall, that’s a different scope and we’ll say so up front.
Expect $450 to $1,600 per door installed, or $2,800 to $6,500 for a five-door package. Material, custom sizing, repairs, and hardware are the main variables. Call (888) 276-8078 for an exact quote; estimates are free.
Every door we install is backed by our 730-Day Done Right Promise. If a door we hung stops latching, drags, or leaks at the threshold within that window, we come back and make it right. The door and hardware also carry their manufacturer’s warranty.
Get a free door installation estimate in Brentwood
Reach out and we’ll schedule a free on-site estimate for your Door Installation in Brentwood, walk the openings with you, and hand you a written line-item quote with the full price. Call (888) 276-8078, and a live person answers around the clock, not a voicemail. Our technicians bring up to 12 years of experience, show up background-checked and in uniform, and stand behind the work in writing.
Written by the team at Groundwork Construction Co. of Vacaville.












