







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Discovery Bay, CA: What to Expect
Cabinets & countertops in Discovery Bay, CA typically run $14,000 – $45,000 for a full kitchen’s worth of new cabinetry and stone, and most projects finish in three to five weeks once materials land. A cabinet-only job runs $4,000 – $13,000 and countertop-only work $2,000 – $6,500. Wet bars and butler’s counters in canal-front homes are common here, and they add a few thousand on their own. Call (888) 276-8078 for a free on-site estimate and a written line-item quote.
How We Run a Cabinet and Countertop Job

A cabinet and countertop swap is a sequence, not a single event. Here’s how the stages actually unfold on a Discovery Bay kitchen.
Stage 1: Measure and template (day 1, about 2 hours)
We measure every wall, check for out-of-square corners and wavy drywall, and photograph the existing plumbing and electrical rough-ins. You decide cabinet style, door profile, finish, and whether the layout stays put or moves. This is also when you pick the countertop slab or pattern, which locks in a lead time of roughly two to four weeks for stone.
Stage 2: Demo and prep (day 2 – 3, one to two days)
Old cabinets come out, and we check the wall behind them. In Discovery Bay, many homes from the 1970s through the 2000s have a layer of dated tile and a stubborn layer of old adhesive that has to come off before anything goes back. Subfloor and framing get inspected now. If you’re moving the sink or range, this is when we open the wall and pull any permits.
Stage 3: Cabinet installation and leveling (day 3 – 5)
Base and wall cabinets go in, shimmed and leveled. Doors and drawers go on last so they don’t get scratched. You inspect the layout and confirm drawer pulls and hardware placement before we close it up.
Stage 4: Countertop template and fabrication (a one- to two-week gap)
For stone and engineered quartz, we template after cabinets are set, which means about a week of dead time while the fabricator cuts. This is normal and not a scheduling failure. Laminate and butcher block can be cut faster if timing matters.
Stage 5: Countertop install, backsplash, and punch list (day 10 – 15)
Countertops set, seams get filled, and the sink and faucet go in. Backsplash comes next. We walk the job with you, fix what’s on your list, and leave you a written punch list so nothing gets dropped.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Most of the decision weight sits in three places: cabinet construction, countertop material, and hardware. Here’s the honest trade-off on each.
- Cabinet boxes: particleboard vs. plywood. Particleboard is cheaper and perfectly serviceable in dry rooms. Plywood costs more but holds up better in kitchens with heavy humidity swings. Given the Delta’s muggy summer air, we lean plywood for sink cabinets especially.
- Doors: MDF vs. solid wood vs. thermofoil. Solid wood (Wellborn’s painted and stained lines are a common pick) is repairable and ages well. Thermofoil is the budget option but can peel at edges in humid rooms within ten years.
- Countertops: quartz vs. granite vs. laminate. Quartz (Cambria, Silestone, Caesarstone) is non-porous, doesn’t need sealing, and handles the wear. Granite is beautiful and unique but needs sealing every year or two. Laminate is the cheapest at $2,000 – $6,500 installed and works fine in a rental or flip.
- Hardware and pulls. Cheap pulls look cheap in five years. Expect to spend $200 – $800 on hardware for a standard kitchen, more if you want soft-close on every drawer.
- Sink and faucet. Undermount sinks add fabrication cost because the stone edge has to be polished. Drop-in sinks are cheaper but show a rim.
What Cabinets & Countertops Cost in Discovery Bay, CA

Expect $14,000 – $45,000 for cabinets and countertops together on a typical Discovery Bay kitchen. A cabinet-only install runs $4,000 – $13,000; a countertop-only job runs $2,000 – $6,500. Backsplash adds $800 – $2,500 and a kitchen island another $3,000 – $10,000.
Five things push the number to the low or high end:
- Kitchen size and cabinet count. A galley at 15 linear feet costs far less than a 30-foot L-shaped kitchen with a peninsula.
- Layout changes. Moving the sink, range, or island plumbing and electrical adds $2,000 – $6,000 and pulls a permit.
- Material grade. Stock cabinets vs. semi-custom vs. full custom spans roughly 2x in cost. Quartz with a waterfall edge costs more than standard slab.
- Existing condition. Old tile, water damage behind the sink, or out-of-square walls all add labor.
- Permit scope. A straight cabinet swap typically doesn’t need one. Moving plumbing or gas does.
Our written estimate is itemized: cabinets, countertops, labor, demo, disposal, permits if needed. What’s not included is anything we haven’t scoped, and we don’t change the number mid-job without your written approval.
See the difference
Before
After
Before
After
Before
AfterWhat Discovery Bay Homes Specifically Do to This Job
Discovery Bay is a waterfront community built on the Delta, and the houses here reflect it. Most of the housing stock went up between the 1970s and 2000s, and a large share of that is custom or semi-custom single-family construction with wet bars, open kitchens, and layouts that were designed for entertaining rather than efficiency. When we replace cabinets in canal-front homes off Windward Point or near the Discovery Bay Yacht Harbor, we routinely find moisture damage behind sink cabinets from years of humidity off the water – not from leaks, but from air alone. That’s a Discovery Bay problem, not a Brentwood one.
ZIP 94505 permits run through Contra Costa County, and the county wants to see a plumbing and electrical plan signed off before cabinets go in if you’re relocating anything. The Delta levee and floodplain rules that govern the exterior of these homes don’t change interior cabinet work, but they do affect how materials get delivered to canal-front lots. On narrow streets with a private dock blocking the driveway, we schedule deliveries by hand-carry or smaller truck so we’re not blocking the canal-front traffic. It’s the kind of logistics that only makes sense here.
Serving Discovery Bay, CA – Our Local Coverage Area
We serve Discovery Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Discovery Bay

Most jobs run three to five weeks from demo to punch list. The dead time is the countertop fabrication window, usually one to two weeks after cabinets are set. Call (888) 276-8078 for a specific timeline on your kitchen.
Usually not for a straight swap. You need one if you move plumbing, gas, or electrical, which Contra Costa County requires a signed plan for. We pull permits when they’re required and pass inspection before we close the job.
Yes, and that’s the majority of our Discovery Bay jobs. Keeping the sink, range, and island exactly where they are saves $2,000 – $6,000 in plumbing and electrical work and keeps the project off the permit calendar.
Our workmanship is covered by the 730-Day Done Right Promise. If something we installed isn’t right, we come back and fix it. Manufacturer warranties on the cabinets and stone run separately and we’ll walk you through each one.
Often, yes. Many homeowners pair this work with a full kitchen remodel or a garage conversion ADU or a new detached ADU when they want the whole scope under one contract. We scope both on the same site visit.
Get a Free Estimate for Cabinets & Countertops in Discovery Bay
Call (888) 276-8078 to schedule a free on-site estimate. We’ll measure your kitchen, look at what’s behind the old cabinets, and hand you a written line-item quote before you commit to anything. Live person on the line, 24/7. Upfront pricing, no surprises. Free estimate and design consult included, plus $1,000 off projects over $10,000 and 0% financing for 18 months if you need it.
Written by the team at Groundwork Construction Co.












