







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Brentwood, CA: What the Job Really Costs and How Long It Takes
Cabinets & countertops in Brentwood typically run $14,000 – $45,000 for the combined project, and most homes we work in are finished in 2 – 4 weeks from demo to final caulk. New cabinet boxes and doors land in the $4,000 – $13,000 range; countertops add $2,000 – $6,500 on top depending on material. Call (888) 276-8078 for a free on-site estimate with line-item pricing.
How the cabinets and countertop job actually runs, stage by stage

Most Brentwood projects skip the chaos because the sequence is locked before anyone swings a hammer. Here’s the order we run, and what you decide at each stop.
Stage 1: Template and field measure (day 1)
We measure every wall, check for square, and photograph the plumbing and electrical locations behind the old cabinets. On Brentwood’s master-planned homes, the drywall is usually straight and the framing is predictable, which makes this a two-hour visit. You approve the layout and door style here. Any surprise (a wall out of plumb, an outlet that needs moving) gets priced before we order anything.
Stage 2: Demo and prep (days 2 – 3)
Old cabinets and counters come out, usually in a single day on a standard 10×10 galley or L-shape. We protect the flooring, cap the plumbing, and patch and prime the wall behind the uppers. If you’re moving a sink or range, this is when the rough-in happens, and it’s the one stage that can add a day. You decide nothing during demo except what to keep.
Stage 3: Cabinet install (days 4 – 6)
Bases go in first, shimmed and scribed to the wall, then uppers, then fillers and crown. Expect two to three working days. Doors and drawers get hung last so they don’t get knocked around. You sign off on alignment and soft-close function at the end of this stage, before the counters are templated.
Stage 4: Countertop template, fabricate, install (days 7 – 14)
Natural stone and quartz get templated after cabinets are set, because the counter has to fit the actual installed boxes, not the drawing. Fabrication takes 5 – 10 business days in the East Contra Costa shops we use. Installation is a half-day. You pick the edge profile and sink cutout at template time, and that’s your last material decision.
Stage 5: Sink, faucet, and final walkthrough (days 15 – 18)
Faucet, disposal, and any under-cabinet lighting get connected, then we run a leak check and a drawer-and-door sweep. You get a punch list and a date for anything that needs a return visit, usually hardware or a backordered panel. The whole thing lands inside our 730-Day Done Right Promise, so if a hinge sags in month eight, that’s on us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Every Brentwood client faces the same five decisions. Here’s the honest trade-off on each.
- Cabinet boxes: stock vs. semi-custom. Stock (big-box, fixed sizes) is the cheapest and fastest but leaves awkward gaps you fill with dead space. Semi-custom, like KraftMaid, lets you size to the inch and pick the door and finish. Most Brentwood kitchens land semi-custom because the layouts are forgiving and the price gap is smaller than people expect.
- Door material: painted MDF vs. solid wood vs. thermofoil. Painted MDF is the value pick and holds up fine in a dry inland climate. Solid wood takes dings better and refinishes. Thermofoil is the budget option but peels at the edges in a hot kitchen, and Brentwood summers are hard on it.
- Countertop: quartz vs. granite vs. laminate. Quartz is the default for a reason, non-porous, consistent, no sealing. Granite is a natural slab with real variation and slightly more upkeep. Laminate is the honest budget choice and can look good for a decade if you treat it kindly.
- Sink and faucet brand. We spec Moen or Delta for faucets (parts are everywhere), and a Blanco or comparable undermount for the sink. These wear items get replaced first, so buy from a brand with a real warranty and local parts.
- Edge profile and backsplash height. A standard eased edge is included in most quotes. A built-up or mitered edge adds labor. A full-height slab backsplash costs more than a 4-inch splash, but it’s the one detail that separates a good kitchen from a great one.
What Cabinets & Countertops costs in Brentwood, CA

The combined project in Brentwood runs $14,000 – $45,000. Here’s how the line items break down, so you can see where your budget goes.
| Line item | Brentwood range |
|---|---|
| Cabinet installation (standard kitchen) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island | $3,000 – $10,000 |
Four things push a job to the low or high end. Size is the biggest factor, a galley kitchen with eight boxes is a fraction of a U-shape with an island. Material grade swings the counter by thousands: laminate at the bottom, quartz in the middle, a premium slab at the top. Relocating plumbing or electrical (moving the sink, adding an outlet for a new range) adds real labor and a permit. Cabinet condition matters if you’re keeping and refacing rather than replacing; painted boxes in good shape cost far less to update than full replacement won’t.
Our written estimate lists every line: cabinet brand and door style, counter material and square footage, sink and faucet model, demo, disposal, and permit fees. What it won’t include unless we flag it upfront: a new backsplash if you didn’t ask (worth pairing, see our Kitchen Remodeling in Brentwood page for scope), appliance costs, and any structural change. Those get quoted separately and in writing, because the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Brentwood homes specifically do to this job
Brentwood’s dominant housing stock is late-1990s-to-2020s stucco-and-tile suburban homes, and that build era changes the cabinet and counter job in ways we don’t see on older lots elsewhere in East Contra Costa. The kitchen footprints were designed around a standard appliance package and a straight wall of cabinets, so the existing plumbing sits close to where a new sink will go, and relocating it is often a short trip rather than a slab break. That’s a cost advantage most people don’t expect.
The hotter, drier inland climate is hard on older thermofoil doors, which peel at the edges, and on wood counters near the sink. But the bigger local wrinkle is what’s underground. On the newly graded former orchard land that’s been subdivided into Brentwood’s master-planned communities over the last two decades, crews sometimes hit old irrigation lines, land-leveling grades, or unrecorded ag-era drain tiles when a job runs into the slab or a wall cavity. On infill lots in Antioch, you rarely get that surprise. It’s a Brentwood-specific condition, and it’s why we do a visual inspection before we finalize a quote rather than after demo starts.
Permits and HOA rules matter too. Brentwood kitchens that only replace cabinets and counters in the same footprint typically don’t need a building permit, but if we move a wall, relocate a gas range, or add an island with a sink, we pull the permit and schedule the inspection. Many planned-community HOAs in Brentwood also require ARC (architectural review) approval for exterior-visible changes; a counter swap is usually exempt, but we’ll tell you when it isn’t. Our kitchen remodeling service covers the wider project when you’re ready to go further.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Brentwood

Most Brentwood jobs run 2 – 4 weeks from demo to final walkthrough, with the countertop fabrication window as the longest single stretch. Cabinets alone can be installed in 2 – 3 days; the wait is the template-to-install gap for quartz or granite. Call (888) 276-8078 for a free estimate with a real schedule for your kitchen.
Usually not, if you’re keeping the same footprint and not relocating plumbing, gas, or structure. A straight cabinet and counter replacement is generally treated as cosmetic. The moment you move a sink, add an island with water, or take out a wall, we pull the permit and get it inspected. Call us to confirm your specific scope.
Yes, and most Brentwood clients do exactly that. Staying in the same footprint keeps the price at the low end of the $14,000 – $45,000 range and keeps the schedule shorter. Moving plumbing or a wall is doable but adds permit and labor cost, and we’ll tell you upfront which version makes more sense for your kitchen.
Combined cabinets and countertops run $14,000 – $45,000 in Brentwood. Material grade, kitchen size, and whether you relocate plumbing move that number. You get a line-item written estimate, plus our $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 276-8078 for your free estimate.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. If a drawer glide or a counter seam fails inside that window, we come back. Call to get started.
Get a free cabinets & countertops estimate in Brentwood
Call (888) 276-8078 and a live person will schedule a free on-site estimate in Brentwood. On the visit we’ll measure, show you cabinet and counter options, and hand you a line-item written quote, no surprises. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months. If your project is bigger, we also handle a Garage Conversion ADU in Brentwood, or, if you want to go the other direction, a New Detached ADU in Brentwood. We cover all of Brentwood.
Written by the team at Groundwork Construction Co.












