







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Antioch, CA: What the Job Actually Involves
A chain link fence in Antioch, CA typically runs $3500 – $9000 for a standard residential lot, and most jobs are finished in one to three days once materials land. You’re getting galvanized steel posts set in concrete, tension wire and top rail, and a stretched mesh skin with a gate or two. Call (888) 276-8078 for a free on-site estimate and a written line-item quote. Pricing here swings mostly on footage, height, gate count, and whether the ground is flat valley lot or hillside grade.
How We Build a Chain Link Fence in Antioch, Start to Finish

Chain link is a fast job, but only when the sequence is right. Here’s what actually happens on a typical Antioch build, stage by stage.
Day 1, morning: walk and mark. We walk the property line with you, confirm corners, gate locations, and height, and call 811 for utility locate. That locate is the single most important step before anyone swings a digging bar. You decide the gate swings (in or out), the height (4, 5, or 6 feet), and whether you want a gate at all on the side yard. On older 94509 lots, we also check whether the existing fence sits on the true property line or a foot over from a past re-fence.
Day 1, afternoon: demo and set posts. Old fence comes down and hauls off, then we lay out post holes on 8-foot centers and set galvanized posts in concrete. Terminal posts, corner posts, and gate posts get bigger footings and deeper holes because they carry the tension. Concrete needs to cure before the mesh goes on, so this is usually where the day ends.
Day 2: rails, tension wire, and mesh. Top rail goes up, tension wire gets pulled along the bottom, and the chain link mesh is stretched and tied off at every post. This is the part that separates a fence that stays tight for fifteen years from one that sags by year three. Gates are hung and adjusted here. You walk the line before we call it done.
Day 2 or 3: cleanup and final walk. Concrete spoil gets removed, disturbed soil gets raked, and we do a final tension check on every span. Most Antioch chain link jobs close out inside two days. Larger lots or hillside grade in 94531 can push to three.
What you decide, and when. Height, gate count, mesh gauge, and gate hardware all need to be locked before we order material. Colors and coatings can be chosen up to a week out. If the fence is part of a full Fence Installation in Antioch plan that also includes a driveway-side gate or a shared boundary with a neighbor, we flag that on day one so nothing gets re-dug.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link is not one product. The choices below are the ones that move both the price and the lifespan.
- Mesh gauge (11.5 vs. 9 vs. 6). 11.5-gauge is the standard residential wire and the cheapest. 9-gauge is noticeably heavier and stands up better to dogs, kids, and foothill wind. 6-gauge is commercial grade and rarely worth it for a backyard.
- Coating (galvanized vs. vinyl-coated). Bare galvanized is the budget pick and holds up fine in Antioch’s dry summers. Vinyl-coated (usually black or green) costs more but reads less industrial from the street and handles the wet winters better.
- Height (4, 5, or 6 feet). Four feet is the visual minimum and the cheapest. Five feet is the sweet spot for most yards. Six feet adds security but some Antioch HOAs restrict it on street-facing lines, so check first.
- Gates and hardware. Walk gates run on hinges with a latch; drive gates need heavier posts, drop rods, and often a rolling carriage. Self-closing and self-latching hardware matters if you have a pool or a dog that tests the gate.
- Post setting. Concrete-set posts are the standard and what we recommend. Driven posts are faster and cheaper but shift on Antioch’s expansive clay.
If the property also needs a new entry door or garage-side door before the fence line makes sense, homeowners often pair this with Door Installation in Antioch so the exterior finally reads as one finished job.
What a Chain Link Fence Costs in Antioch, CA

Expect $3500 – $9000 for a residential chain link fence in Antioch, based on roughly 150 to 300 linear feet with one or two gates. The number moves on five things:
- Footage and gate count. Every extra run of fence, and every gate, adds post, footing, and hardware cost.
- Height and gauge. A 6-foot 9-gauge build runs meaningfully higher than a 4-foot 11.5-gauge build of the same length.
- Terrain. Flat 94509 lots are the easy case. Hillside grade in 94531 needs stepped panels, extra posts, and sometimes a short retaining footing, and that pushes toward the top of the range.
- Existing fence removal and haul-away. Tearing out an old fence and disposing of it adds cost and a half day.
- Permit scope. Most residential chain link under six feet doesn’t require a building permit in Antioch, but corner lots, height over six feet, or anything that reads as a privacy screen can trigger review. We confirm before digging.
Every written estimate from us is line-item: footage, gauge, coating, gate hardware, demo, haul-away, and permit fees if any. What typically isn’t included: property line surveys (if the line is disputed, that’s a separate licensed survey), stump removal, and any concrete flatwork the fence would sit on. If the yard is being torn up anyway, some homeowners roll the fence into a larger ADU Site Prep & Utilities in Antioch scope so trenching and grading happen once.
See the difference
Before
After
Before
After
Before
AfterWhat Antioch Homes Specifically Do to a Chain Link Job
Antioch is two different fence markets in one city. The 94509 flats are packed with mid-century tract homes and older downtown stock, and those yards bring the classic problems: property lines that drifted a foot over the decades, old concrete footings buried under the topsoil, and galvanized posts that have rusted at the soil line. On those lots, demo takes longer and we dig wider holes to clear debris. The 94531 hillside subdivisions are a different job entirely. Those yards sit on expansive clay and slope creep, so a fence built on grade needs stepped panels, deeper footings on the downhill side, and drainage thought in where water pools after a winter rain. The atmospheric river storms we get most winters will find any weak post footing on a slope, so we’re deliberate about it. If the property line runs along a retaining wall or a shared drainage swale, we walk the grade before we quote. We cover the whole city, and you can see the wider scope on our Antioch service-area page or the full Fence Installation hub.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chain Link Fence in Antioch

Most residential chain link fences in Antioch are done in two days, with three days on larger lots or hillside grade in 94531. The build itself is fast; the curing window between setting posts and stretching mesh is the reason it can’t be a single-day job. Call (888) 276-8078 to schedule a free estimate and we’ll give you a realistic window for your property.
In most cases, a residential chain link fence under six feet in Antioch does not require a building permit. Corner lots, height over six feet, and fences that function as a privacy screen can trigger review, and HOA rules can be stricter than the city. We confirm before scheduling and handle the paperwork when it’s needed. Call (888) 276-8078 and we’ll tell you which case you’re in.
Yes, in nearly every case. Chain link posts go in 8-foot on center and the utility locate (811) tells us exactly where the lines are so we route around them. If a gate needs to land over an existing water or gas line, we shift the gate rather than move the utility. The exception is a new gate that needs a concrete pad or a driveway crossover, which is a bigger scope. Call (888) 276-8078 for a free estimate and we’ll walk it.
Chain link fence in Antioch runs $3500 – $9000 for a standard residential lot with one or two gates. The low end is a flat 94509 yard, 4-foot 11.5-gauge galvanized with one walk gate. The high end is a 6-foot vinyl-coated build on hillside grade in 94531 with a drive gate and old-fence haul-away. Call (888) 276-8078 for an exact quote; estimates are free and written.
Every chain link fence we build is covered by our 730-Day Done Right Promise. If a post shifts, a gate sags, or a span of mesh loses tension inside that window, we come back and make it right in writing. Material warranties come separately from the manufacturer. Call (888) 276-8078 and we’ll put the guarantee in your written estimate before you sign anything.
Get a Free Chain Link Fence Estimate in Antioch
Call (888) 276-8078 to schedule a free on-site estimate for your chain link fence in Antioch. We walk the line, confirm height and gate layout, call 811, and hand you a written line-item quote with the 730-Day Done Right Promise on it. Upfront pricing, no surprises. Financing is available if you want to spread the cost.
Written by the team at Groundwork Construction Co.












