







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Oakley, CA: What the Job Actually Involves
Paver driveways in Oakley, CA typically run $7,000 – $18,000 and take three to six working days from demo to final compaction, depending on square footage and base prep. You’re looking at excavation of the old surface, a compacted aggregate base, a sand setting bed, and interlocking pavers edged with restraints that hold the whole field in place. Call (888) 276-8078 and we’ll walk your driveway, check the grade, and put real numbers in writing before anything gets torn out.
How We Build a Paver Driveway, Stage by Stage

Every Oakley paver driveway we install moves through the same five stages. Here’s what happens and when, so you know what you’re paying for.
Stage 1: Site walk and layout (day 1, half day)
We measure the driveway, check how water currently drains off the slab or gravel, and mark the finished grade. On former ag parcels around Oakley this is where we find the surprises: old irrigation lines, buried debris, or fill that never got compacted. You decide the paver pattern, color, and border at this point, because the order goes in before we break ground.
Stage 2: Demo and excavation (day 1 – 2)
Existing asphalt, concrete, or gravel comes out and goes to the dump. We excavate to a depth that fits base, bedding sand, and paver thickness, typically 8 to 10 inches total. On driveways where the old surface sat too high against the garage slab, we correct that now instead of living with a lip at the door.
Stage 3: Base prep and compaction (day 2 – 3)
This is the stage that decides whether a paver driveway lasts twenty years or five. We lay class II aggregate base in lifts and compact each one, then check grade with a level and string line. Oakley’s flat Delta-edge lots make drainage planning the critical call here: we set a minimum 2% slope away from the house and garage so winter rain runs off instead of pooling against the foundation.
Stage 4: Setting bed and paver installation (day 3 – 5)
A screeded sand bed goes down, then the pavers get laid by hand, cut at edges and around curves with a wet saw. You see the pattern taking shape by mid-day. We set edge restraints in concrete on both sides so the field can’t spread, which matters more on a wide Oakley driveway than on a narrow one.
Stage 5: Compaction, sand, and cleanup (day 5 – 6)
We run a plate compactor over the finished field, sweep polymeric sand into the joints, mist it to set, and clean up. You get a walkthrough and care instructions. The whole sequence runs three to six days for most residential driveways; larger or irregular layouts push toward a week and a half.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Most of the decisions on a paver driveway come down to four choices. Here’s the honest trade-off on each.
- Concrete pavers vs. clay brick. Concrete pavers cost less and come in the widest color range; clay brick costs more but holds color longer under Oakley’s summer sun. For most homeowners, concrete pavers with a good sealer are the value pick.
- Paver thickness. Standard 60mm pavers handle foot traffic and light vehicles; 80mm is the right call if a heavy truck or RV parks on the driveway. The thicker paver adds cost but resists rutting.
- Pattern. Running bond is the cheapest and fastest to lay. Herringbone and basketweave cost more in labor because of the cutting, but they lock together better and resist shifting on a slope.
- Permeable vs. standard system. Permeable pavers with open joints and a gravel base let water drain through instead of running off. They cost more upfront but help on lots where runoff has nowhere to go.
Edge restraints come in steel, aluminum, or concrete; we set them in concrete on driveways that see regular vehicle weight. Belgard is one of the paver lines we work with when a homeowner wants a specific look.
What Paver Driveways Cost in Oakley, CA

Expect $7,000 – $18,000 for a full paver driveway installation in Oakley. A standard two-car driveway with a simple pattern lands near the low end; larger footprints, curves, borders, and heavy-duty thickness push toward the top.
Here’s what actually moves the number:
- Square footage. A single-car pad and a three-car driveway are different jobs. The largest single cost driver.
- Existing surface and demo. Tearing out old concrete costs more than pulling up gravel. We quote demo separately so you see it.
- Base condition. Soft fill or failed subgrade on a former ag parcel may need extra excavation and aggregate, which adds cost.
- Paver grade and pattern. Herringbone, borders, and thicker pavers add material and labor.
- Drainage and grading. If the lot drains poorly, adding a swale or correcting slope adds scope.
A written estimate itemizes excavation, base, pavers, edge restraints, sand, and cleanup line by line, so you know what you’re paying for. Permits, if your project triggers one (usually tied to curb or right-of-way work), are quoted separately. Call (888) 276-8078 for an exact number; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Oakley Homes Specifically Do to This Job
Oakley grew up as an agricultural Delta town, and a lot of it still sits on former orchard and farmland. That shapes paver work here in ways you don’t see in older established cities. When we excavate on former ag parcels, we regularly hit old irrigation lines and variable fill soils that never got properly compacted. On flat Delta-edge lots, drainage is the whole game: winter rain has nowhere to run if the grade isn’t set right, so we plan slope and edge restraints carefully before the first paver goes down.
Most of our Oakley driveways are on the 1980s-to-2010s tract homes that replaced the farmland. Those builder-grade driveways are often original concrete near the end of its life, or gravel pads that never got a proper base. Summer heat here stresses exterior surfaces and concrete curing, so we schedule pours and compaction with the weather in mind. If your paver driveway is part of a full Driveway & Pavers in Oakley project, we scope the whole thing together. We cover all of Oakley and the surrounding East Contra Costa area.
Paver driveways are one job under our wider Driveway & Pavers service, and homeowners often pair this with Door Installation in Oakley when they’re reworking the front of the house at the same time. Some also refresh the kitchen while we’re on site with Cabinets & Countertops in Oakley.
Serving Oakley, CA – Our Local Coverage Area
We serve Oakley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Oakley

Most residential paver driveways take three to six working days from demo to final compaction. Larger footprints, curves, and drainage corrections push toward a week and a half. Weather is the one variable we can’t control; we schedule around it. Call (888) 276-8078 to get a timeline for your specific driveway.
Most private paver driveways on your own lot don’t require a building permit, but any work touching the curb, sidewalk, or public right-of-way does. We check what your project actually triggers before we start and pull what’s needed. Call (888) 276-8078 and we’ll tell you upfront whether permits apply.
Paver driveway installation in Oakley runs $7,000 – $18,000 for a typical residential driveway. Size, existing surface, base condition, paver grade, and drainage all move the number. Call (888) 276-8078 for a free written estimate with line items.
Sometimes, but only if the existing concrete is sound, properly graded, and can take the added height without trapping water. Failed or cracked slabs need to come out first. We check the base on the walkthrough and tell you honestly which way makes sense. Call (888) 276-8078 to schedule the look.
Workmanship on our paver driveways is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. Pavers themselves carry the manufacturer’s warranty on top of that. Call (888) 276-8078 and we’ll walk through the coverage in writing.
Free On-Site Estimate for Paver Driveways in Oakley
Call (888) 276-8078 to schedule a free on-site estimate for your paver driveway in Oakley. A live person answers the phone, day or night. We’ll walk your driveway, check grade and base, talk through paver options, and leave you with a written estimate itemized line by line. The number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.












